Want this question answered?
It nearly cost above hundred dollars to replace liner in 27 foot round 48in deep beaded pool
Pie times the radius squared
It cost me $850 in the Springfield MO area plus the cost of the liner and materials. Thought that was pretty high myself.
He is 100% wrong...your pool, being most likely a doughboy (really one of the few companies who still make a 28), needs a 70in liner or greater....
I know that there are expandable liners that are available from online suppliers such as intheswim.com. This particular company also has a custom pool liner service too.
i have an estherr Williams pool 1988 still in good shape with everything new liner new carpet and cover how much can i get for it 27 round with all filter and chemicals linda thanks
I used a sand base for our 20' round above ground pool. It's much easier to deal with after the pool is gone. Greener too.
Welcome to my world, we have been struggling with a 24ft above ground that was never put in level. The easiet way we found was to buy a new liner, cost us $300, but it came out of the package really neatly, and there were no other holes in it ie strainer. WE I mean four of us, worked at getting the liner in place, I dont think one persone could ever do it alone. When we were happy with where it was sitting, we added a few inches of water, then worked out the excess wrinkles. Seems to be doing ok now. good luck
I was given an 18 ft round 4 1/2 ft. deep pool. You will need to replace the liner if not it can cause the pool to collaspe do to liner shrinkage. Check to see how much wiring you will need to run electricity to the pump and any outdoor lighting. In checking to have someone come in and set it up it would costed me around 1200 but we dug it out ourselves and including liner chemicals, and wiring we spent 600 dollars. Hope it helps
I have a 97 Lesabre and you have to remove 3 hex nuts behind the light in the trunk. Hope it helps. Len Inside the trunk there are round clips holding the trunk liner on. Remove those round clips and under the liner you will see black things that unscrew, unscrew all of theme on the side that you need to replace. After you unscrew them on that side the outside lends will come out and you will see where the bulbs are. Then after you replace the bulb just replace the black things and the round clips and your done.
Due to the differences in engineering and the parts involved, there really is no way to convert an oval above ground pool into a round pool.
36 ft