The links are about $40 each at retail. Labor is 30 mins max per side.
Rick
I'm a retired ASE Master/L-1 Technician. I still keep current with the latest automotive technology. Visit my blog for cool articles and TSB's: http://free-auto-repair-advice.blogspot.com
check your swaybar links and bushings
Your steering linkage get loose. The swaybar end links are also a common failure
See sources and related links below to lookup Dodge Caravan brake light lamp part numbers by vehicle year.
No links, only fuses. They are in the under hood and under dash fuse boxes.
remove 2 bolts, knock off old link, replace with new. repeat on opposite side. 15 min. job
sway bar end links
See sources and related links below.
The 1996-2000 Dodge Caravan and Grand Caravan takes 28" replacement windshield wiper blades on both sides front and an 18" rear replacement wiper blade. See sources and related links below for more information.
the air conditioner on out 1991 dodge caravan quit working. we changed the fan and it worked fine then stopped, the compressor clutch isn't trying to kick in. we need to find where the fuse links are to see if that is the problem
You may want to also look at your swaybar, the swaybar bushings, the swaybar links, the link bushings, the tie rods, and the wheel bearings - any one or combination of those could create a bad vibration at high speeds if faulty. I had to replace the swaybar links and bushings on my 95 GC Laredo to solve a similar issue. With the replacement of the rear end you might want to also be sure that the axle gears are properly aligned, free of dirt and debris, and well lubricated.
See sources and related links below for the correct tail light lamp bulb part numbers.
The 2001-2007 Dodge Caravan and Dodge Grand Caravans have the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.