In Alabama where I live and work as an electrician for the last 31 years We typically charge by the square ft of heated space. At this writing we're charging $2.65 to $3.00 per square ft. Anything outside heated areas is extra. Example... 1000 square ft. = $2600 labor and material....excluding fixtures If you were going to do it yourself you could get by for about $1500. give or take a few bucks. <><><>
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
== ==
The cost of wiring an entire house depends on many factors:
You should contact a local electrician for pricing and plan to have a set of blueprints along with any special requirements.
Length and wire gauge will determine this for you...
Barbed wire was not invented until 1874, so obtaining it in 1800 meant purchasing the raw wire, cutting it at an angle and twisting it into a form of barbed wire. The purchase price would have depended on the length and gauge of wire involved in the project.
If you have some coils of wire and a house that needs rewiring, an electrician is needed to complete the job. He/she would also know if the wire you have is the correct wire to use in the rewiring.
If the wiring system in your house is that old, then there is nothing that you can do that is not going to cost you more money than what you paid for the fan. Just wrap the wire up and push it to the back of the ceiling box and enjoy your new fan.
Hotwire is an internet site not something that can he purchased physically by an individual. Hotwire helps its customers make travel plans.
£1.35
Harrison is awsome and is the best
Usually the wire material is copper. On larger distribution systems, as cost saving measures, the wire material is aluminum. The triplex wire drop to your house from the utility system is always aluminum conductors.
Length and wire gauge will determine this for you...
Labor cost per square foot to wire a house may vary depending on your contractors rates. They will usually have a rate per hour. You can multiple the hourly rate by the square footage needed per hour.
About a fiver if it's a good one. It depends where u get it
The cost of a wire storage rack at ikea depends on the size. So it could cost about 50 dollars if you buy a small one or it could cost about 300 dollars if you buy a big one
About a fiver if it's a good one. It depends where u get it
You will have to be much more specific to get an answer. Your description fits many items. -Wire gauge and metal at least is needed.
The Cost - The Wire - was created on 2002-08-11.
Fiber mesh is the best way to go in my opinion! You save the cost of wire mesh , and installtion! And works better than wire.
75.00 depending where you run the wire from and to