Well it will cost an avg about 600-800 dollars to get it repaired depending on the the type of car and size of engine and some the will look at it and add on some money for how hard it will be to get access to it.
A blown gasket can be repaired by replacing the gasket...if you are talking about the head gasket, then you have to remove the cylinder head from the engine block and replace the gasket that is inbetween them. Cracked heads generally have to be replaced because they are made of aluminum which cannot be repaired permanently once it is cracked.
It requires replacing the head gasket.
If not repaired at once you will get water in the oilpan. It can warp the engine head.
Usually when the cylinder head gasket is blown (broken or damaged). It cannot be repaired but has to be replaced with a new head gasket.
Contact a ASE certified mechanic in your area.
Yes get it from the dealership
hi if you replace the head gasket you will need to have the head repaired and machined as the head alloy eat's out which causes the gasket to fail
Take it back to the garage that did the head gasket repair. They probably misplaced a vacuum line.
Other than a leak, a blown head gasket. Very serious, so stop driving until this is repaired if you suspect a blown head gasket. Serious engine damage will occur.Other than a leak, a blown head gasket. Very serious, so stop driving until this is repaired if you suspect a blown head gasket. Serious engine damage will occur.
about 1500 to 2000
Not very. You should stop and get it repaired ASAP.
Yes, a blown head gasket will allow coolant to enter the combustion chamber and the oil pan mixing with the oil. This will, if not repaired, slowly destroy the engine bearings and rings. STOP driving this car until you have this repaired.
You've got either a leaking intake gasket or a leaking head gasket. It's a serious problem which needs to be repaired.
You have either a blown head gasket or a cracked head. Serious engine dame will occur if this is not repaired. Do not drive the vehicle in until it is repaired. If you have an oil cooler line in the radiator, it could be the radiator. Otherwise, it's probably a head gasket.
Replace it , meaning the cracked head or the gasket . Neither can be repaired . The head can be repaired if its only warped from overheating by having it surfaced . It is best on the 8 valve or the 16 valve engines to replace with new parts.
Chances are you have a bad head gasket if that is happening. Get it repaired ASAP.
More than likely you have a blown head gasket or cracked head. Stop driving the car until you get this repaired, or you will have serious engine damage.More than likely you have a blown head gasket or cracked head. Stop driving the car until you get this repaired, or you will have serious engine damage.
A blown head gasket means the seal around the cylinder heads is leaking. It will leak oil and over heat until the engine seizes unless it is repaired.
No, the exhaust gases are too hot. Generally a collapsible metal gasket is used on exhaust.
From 185 to 265 degrees Fahrenheit.
The vehicle year, model and engine info needed.
Holts Wonda Weld can be used to seal the head gasket in place of a hot welder. The seal will hold the head gasket together until it can be properly repaired. It is not a permanent solution.
Gasket sealers generally do now work on modern engines and should not be used.
sorry to say the head gasket wasnt done properly the last time go back to the bloke who done it and wack him i had the same thing they are ment to skim the head after the gasket change
if you do it yourself a lot cheaper than a shop I have repaired 1 caravan head gasket it only cost me roughly $200.00 give or take some $