5 W 30 on a 2.3 Liter.
Just follow the top rad hose. It's in the housing.
on autozone .com on autozone .com on autozone .com
BIG JOB Get a manual on your car from the parts store and it wil have pictures .
I have the same problem hope someone tells us what to do Mel
It's the pully that's the only one you can actually work on toward the fire wall, it will be on top.
.054 inch ( according to www . ford parts . com , no spaces )
How to find your fuse box on a 1990 Mercury Topaz. 1) Get a double-jointed: spine, neck, arms (both), and possibly fingers (all 10). You'll need them. 2) Look down and to the left of the steering column, behind your hood release switch. YOu'll probably have to lie on your back and slide to where your pedals are to find it. 3) E-mail email@example.com telling him which fuse is for the power/automatic seatbelts. 8 wrong fuses and counting...
about 135 140bhp
Simply take the old ones loose with the clamps and put new ones on. You may want to replace the clamps .
sounds like you are too far down the launch ramp or you live in a really wet area ..
About 225 stock 5.0
Yes. You should also replace the race at the same time.
A 35 hp Mercury outboard, serial number OC144498, would be a 1990 tear model.
If it is the same engine, both either standard or auto, might have to check if the 1990 had over drive, cause the 88 or most of them did not.
Look to the left of steering wheel,under the lower dash panel.Be prepared to be a contortionist.Just one of Fords better ideas.
The stock horsepower is 140 for the 3.1L engine.
The blower is behind the glove box. Remove the glove box door, and there it is. Some small sockets will be in need. It will come out if you wiggle it around.
1990 Chevy what? truck 4.3 160hp, 5.0 180hp, 5.7 210hp, 7.4 235hp?
how can i find where the camshaft sensor on a 1990 mercury marquis
.054 inch , according to fordparts.com
You most definately unpluged the sensor wire. It's a single red wired that plugs onto a sensor just passed the thermostat.