190 hp stock
If you mean 3.8 Litre engine, the answer is 200 horsepower, from the factory. 225 lb/ft of torque.
A haynes manual...
haynes repair manuals are good but you can go to autozone.com and they have online repair manuels as well it a good site for a lot of information on repair work.
You can safely put 2ml into the 10l aquarium
on the crank behind the front cover
There are 460 CID engine swap kits on SUMMITRACING.COM. The 460 is the building "block" for several larger stroker motors. It will take a lot of work. If you have all the necessary parts, it would take the average mechanic at least 6 weeks. Likely more. Unless you're going for a strictly track vehicle, you'd get more bang for your buck with a supercharged 4.6 or 5.0.
it's located on the firewall right in back of the intake
Not very easily if at all, and why would you want to?
3.8 litres is fractionally more than 1 US gallon.
They always blow the head gaskets between 70 and 100 thousand miles.
There is a relay on the top of the compressor that allows the clutch to engage. Check to see if it is bad by removing the relay and use a wire as a jumper while the car is running to see if the clutch engages. If the clutch engages once the jumper is in place then the relay is bad it cost under twenty dollars to replace.
there should be a sticker under the hood of the car that tells you what the gapping should be. .60