Just enough to give it a glaze
125mm
85ml
135cc for 30mm forks
Hi I would like to know how weight and oil in front fork?
It depends on the make of the bike, its type and model/year. In small bikes there can be as little oil in the front forks as 1/4 of a quart or liter, in bigger bikes the amount may be haf a quaet or liter or more. The problem with adding oil to front forks is that bigger bikes need to be jacked or lifted up at the front to fully extend the springs inside so that enough space is made for the new fork oil. The bolts on top of the front forks have to be removed with a wrench and then the oil is poured into the hole. Use a funnel to prevent spillage. If your front forks are leaking the oil you must get new front fork seals. Select thin oil for the forks, 5 W, 10 W or 15 W at the most.
approximately 9.5 to 10.5 ounces.
750mls
449 cc per each leg
If the forks are dry 6oz. If they're wet 5 oz. Use the "dry" if the forks have been disassembled.otherwise use the "wet" quantity
Remove bolts at top of suspension forks. Raise front wheel off ground. Pour oil into top of front forks. Leave 100 mm or 10 cm measured from top of forks.
The recommended oil capacity for the front forks of a Kawasaki KE100 is 160-170cc per fork leg. It is important to refer to the owner's manual for the specific type and amount of fork oil required for optimal performance.
How much fork oil goes into a harley 2002 softail forks??