0
Whatever the vehicle specs call for. There isn't one universal amount for all vehicles.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
When changing an auto ac compressor if you put oil in the compressor do you just add r134a with no oil?
Yes!
How much oil do you put in the ac compressor for a 1999 Toyota Tacoma?
changing ac compressor only, how much oil do i add 2.7 Toyota tacoma 1999.... 6 ounces
How much oil do you put in new AC compressor for a 1988 dodge caravan 3.0 liter?
If you are only changing the compressor, add 3 ounces into the suction port of the compressor before you attach hoses. After hoses are attached rotate the compressor by hand clockwise several turns to distribute the oil.
How much oil goes in the AC compressor of a 2004 town and country Chrysler?
Its always best to drain the oil from the old compressor and then add that same amount back to the new compressor but to be on the safe side add 4 ounces and prime it on the bench first...
How much oil does a 93 grand am need 3.3?
You should add 4.5 liters of oil when changing the oil and the oil filter.
What type of oil and how much should you add after changing the oil in a 1992 Dodge Dakota?
Add 4.5 quarts 10w30, start engine, check and adjust level.
How do you add oil to ac compressor?
Remove the compressor and pour it in. If its making noise its probably to late and you will need to replace it.
How much oil in ac compressor 1995 S10 4.3?
The entire system takes about 8 oz. That is spread out thru all the components. If a hose didn't blow where you would lose alot of oil and you are just replacing the compressor, I would add 3 oz to the pump during installion. Add 4 to 5 ounces of oil into the a/c compressor and then prime it on the bench before you install it.........
How much transmissiion fluid do you add after changing the fluid on 1991 ford pony escort?
It takes 6.5qt when empty/new with no oil in the cooler, but if you just changing the oil it will take 4.5 qt.
How do I change the AC compressor clutch on my 1995 Pontiac Sunfire?
I'm not sure that this is a DIY job. My Haynes manual has no information about actually repairing a compressor. It does, however, go into length about changing out the entire compressor. You should have the system depressurized by a certified AC tech. There are environmental considerations here. Haynes says that when you replace the compressor, to be sure that it A. has oil already in it or B. drain the oil from the old compressor into a graduated container. Add the exact same amount of new oil into the new compressor. When replacing the compressor, you'll also have to replace the accumulator/drier and the expansion (orifice) tube.
How much oil do you add to a 2003 dodge ram 3.7l replacement ac compressor?
That's determined by the make and model of the vehicle, not by the engine displacement.
How much oil is the correct amount for model 95499 central pneumatic air compressor?
This is an oiless compressor; it requires no oil at all.
