Want this question answered?
How much antifreeze does a 1998 chevy mabilu ls take
Empty, 8 oz. If you're replacing one major part such as a compressor, condenser, evaporator or accumulator, add 3 oz.
Low pressure line - larger line from A/C compressor
Yes. Look in the yellow pages for aftermarket a/c's
is it factory or an add on?
Low pressure line Larger line running from compressor
If the compressor is not coming on at all it could be that you are low of refrigerant and just need to add some more.
If you have replaced the compressor only, I would add 3 oz directly to suction port of compressor then rotate the comp by hand a few revolutions. If you have not replaced any major part of the system, very little oil, if any would be added.
if you can find the hp. of the eng., you can add between 12-20 more hp. for the headers.
dexron II
Its always best to drain the oil from the old compressor and then add that same amount back to the new compressor but to be on the safe side add 4 ounces and prime it on the bench first...
You can add Freon to your 1999 Chevrolet S 10 pickup truck cooling system, through the air conditioning compressor ports. The ports are located on the top of the compressor. You would add r134 refrigerant through the low pressure port located on the accumulator/dryer.