0
4,000 PSI working pressure
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Does a narrow hose have more water pressure than a wide hose?
Yes
How can the water pressure be 60 psi at all hose bibs outside but only 40 psi inside the house This just changed last week?
Simple answer is it can't. Possible reasons for what you are seeing are: 1. Broken or inaccurate pressure gauges. - Most likely 2. If there is a check valve before the hose bib and there is a hose attached and full of water and that hose is in the hot sun, it might build up pressure. This pressure would instantly equalize as soon as you spray water.
What is the velocity of water in water jet high pressure pump?
What size nozzles? What is the GPM rating What is the available pressure What lenght of the hose (fricton losses)
Will a quarter inch pipe stepped up to half inch pipe result in a lower pressure for an outside hose bib or do I need to keep all at a half inch to add the hose bib?
i believe the pressure does not change but the volume of water you will be able to use will be less
Why does my pressure drop when your well pump turns on?
You have air getting into the water somewhere, go down and make sure every hose and fitting is tight.
What happens to pressure on the sides of a hose when the speed of the water increases?
The space of the hose gets tighter, because their is so much water wanting to come out
How does a hose work?
Can you be specific? If you mean a garden hose, then basically water is let into the hose and pressure forces the water out.
Does a narrow hose have more water pressure than a wide hose?
Yes
What happens if you partially block the steam of water coming out of a hose?
Pressure builds within the hose and water shoots out farther and with higher pressure... Think showerhead....
How can you run water uphill with a garden hose?
You can run water uphill with a garden hose by decreasing the size of the hose as it moves away from the water source. By decreasing the hose size, pressure in the hose increases and the water will travel uphill.
Why is the rubber hose unable to bent when the tap is on?
Because - the pressure of the water inside the hose provides counter-pressure, making the hose more difficult to bend.
What is the difference between water pressure and air pressure to burst silicon radiator hose?
It will be the same pressure that burst the silicon radiator hose whether you use water or air to burst it. The difference is probably the hose is designed for use with pressured water or use with compressed air.
Why water pressure exiting a hose is different in open air than in a bucket full of water?
The Pressure exerting against the stream (on the end of the Hose opening) is 14+ pounds per square inch in Air, and 64 pounds per square inch in water. So the water in the bucket exerts a greater "Opposing Pressure" against the hose opening. This reduces the effective water pressure as the water exits the hose. If you had a Deep enough Bucket, the flow out of the hose would potentially stop, when the pressures were equal and opposite.
How do you measure home water pressure?
Go to Home Depot and get a pressure guage the will screw on your water hose faucet.
Can you use pressure to clear out a heater core?
Water pressure from a garden hose is sufficient.
Why does the upper radiator hose have no pressure?
Under normal circumstances it will have some pressure just less than the bottom hose. The bottom hose is directly pressurized by the water pump while the upper hose acts as a return hose to keep the water flowing through the engine block. If there is no pressure you could be low on radiator fluid (water/anti freeze mixed) or have a thermostat stuck open.
Water hose is solid and back pressure in water bottle?
possible head gasket
