0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How much water should be in the bottom of your water softener?
4 inches
Does water from water softener harm plants?
Water softened by a conventional salt-based water softener contains sodium. How much depends on the water softener's settings - which in turn is determined by how hard your water is and how soft you want it to be. If there's enough sodium in the water, it can indeed harm house plants. You can avoid this issue by using filtered water, or water from an outside tap (assuming your softener bypasses outside water, as it should). Alternatively, you can get a salt free water softener, which doesn't use sodium chloride to treat water.
How much does it cost to run a water softener per year?
The price will vary based on the type and model of water softener. However, most softeners run at least $200 a year, plus the original cost.
Why does your water taste like salt if you have a water softener?
The answer is.... "it should NOT taste like salt".... While water softeners use salt to function correctly, they only use salt during a process called "regeneration" which is usually scheduled to occur once every 3-7 days in a household softener. During regeneration, the softener rinses salt water thru the resin tank - but during this time, it supplies the home with untreated water that is bypassing the resin tank so it should not be salty. After the softener rinses the resin with salt water it next removes any excess salt out of the resin beads by rinsing with fresh water. All of the salt water and rinse water during the regeneration process is supposed to go directly out to drain, not into the household water supply. By the end of the regeneration the resin tank should be free of salt and there should be no salt taste. If there is a salt taste, it is because the softener is not working properly. The likely causes are: a) the softener may be defective. It may have an internal leak that is allowing some brine (salt water) to escape into the household plumbing during regeneration. b) the controller may be set up (programmed) incorrectly. In particular, the rinse-out time maybe programmed to be too short. (typically a system rinses for 5-10 minutes.) c) there may be a brine-tank problem which is causing the softener to make too much salt water and then it does not have enough time to rinse all of this excess salt out of the brine tank. For a typical household softener, the system should be consuming between 4 and 20 lbs of salt per regeneration (depends on the size of the system and the hardness of the water). If it is using much more than this, there is probably a problem with the brine tank that will either require a service technician to check and fix, if possible, or, if it is not worth paying the cost of replacement parts and labor to fix, you may need a new water softener.
Is water softener salt toxic?
Good quality water softener salt is chemically no different to food salt and some products are supplied as "food grade" e.g. Hydrosoft Granular salt. Too much of anything will kill you, but anyone trying to eat handfuls of salt will soon vomit it up. So water softener salt would not normally be regarded as toxic. There is a common misconception that water softener salt ends up in softened water, which may be the source of this question. In fact only the sodium element of the salt ends up in the softened water, in the dissolved form of sodium bicarbonate (or baking soda). This is completely harmless. A good water softener supplier will install a hard water tap. This should always be used for babies' formula milk and for the very few people on medically supervised low sodium diets. This is because there is a slightly increased level of sodium in softened water which may effect these groups.
How to Repair a Water Softener?
Water softeners don't typically require much maintenance outside of occasional salt refills. However, it is possible for your water softener to break down or malfunction. If you are renting the water softener, then the responsibility for repairs lies with the company that owns it. However, if you own the water softener, you will be responsible for making any necessary repairs to the machine.When a water softener stops working properly, there are several things that may be wrong. You may have noticed that the motor isn't running, that the water is not being effectively softened, that the water has too much iron in it, or that the brine isn't flowing. Depending on the type of problem you are experiencing, the steps for water softener repair will differ.If the problem you are having is that the motor is not working properly, you should first check to see if the power is turned on. If you find that the power is in fact turned on, you will need to test the motor to determine if the part itself is the problem.If the water isn't coming out of the machine soft, the first thing you should try is to flush the tank and clean the injector. To clean the injector, switch the softener to bypass mode and disconnect the softener from power. Next, remove the softener cap, screen, and the injector nozzle. You can then clean the screen with water and soap. The nozzle can be cleaned with a paper clip or with canned air. After all parts have been cleaned, you can reassemble the unit and test it to see if the problem has been repaired.If the problem you are experiencing is that the water has too much iron in it, you can try to replace the filter. Some models can also use salt that has built-in iron-control agents. You can also check to ensure that the bypass valve is in the right position and that there are no leaks in your plumbing.Finally, if you are having trouble with flow in the brine line, you can try to flush the line to fix the problem. After the line is flushed, you can try to replace the filter screen and injector. Also, you can check the line for any damage or kinks that may be obstructing the flow.
How much bleach should be put in 1500 gallon water tank to keep clean?
You should never put bleach in water to keep it clean. You can not drink water with bleach and it and any other living thing in it will die.
Can you use dendritic salt in your water softener?
It is salt, sodium chloride, which softeners use to strip the cation exchange resin beads of calcium and magnesium, (hardness), to regenerate them. So you should be able to use it, but at $0.83 per pound it's much more expensive than the $0.09 per pound softener salt.
How much water to put in a water softener brine tank?
Modern water softeners automatically put water into the brine tank at the end of each regeneration. This water sits in the brine tank and dissolves some of the salt to create a very salty liquid called brine. This brine is sucked back into the water softener main tank during the next regeneration. The brine is used to "recharge" (sometimes called "regenerate") the water softener main tank. After the recharge, the softener can soften a set amount of water before it needs to be recharged again. Depending upon the size of the water softener, it can take between 2 and 8 gallons of brine per recharge. On most water softeners you can set the salt "dosage". Dosage is usually set in "lbs of salt". Each gallon of water will dissolve around 3 lbs of salt so if you set a dosage of 9 lbs, the softener will automatically add around 3 gallons of water to the brine tank after each regeneration.
Water Softner Installation?
form_title=Install a Water Softener form_header=Water softeners can reduce the build up of minerals in the water and in your pipes. What is the current condition of your water?=_ How much water do you use?=_ What type of building will this be used in?=_
What are some common problems with water softener systems?
When looking for information about water softener systems it may be possible to stumble across website content that offers information about known problems with water softening systems. A couple of the reasons stated are too much sodium and another is said to be problems with the onsite septic tanks.
How much chlorine should you add to 2 liters of water to keep it fresh for years?
2 tablespoons
