0
Assuming a standard bale size of 14 inches high by 18 inches wide by 36 inches long, and assuming the bales are only one layer deep, 90 bales would cover a little over 400 square feet.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How many bales of straw does it take to cover 2000 square feet as a ground cover a few inches thick.?
I would guess about 70-80 bales
How many square bales of hay does it take to lightly mulch one acre?
An acre is 43,560 square feet. Most small square bales would lightly cover at least 2x10 ft, but more likely 2x15 ft . Therefore; 43,560 divided by 30 (if each square bale covers 30 sq/ft as an average) = 1,452 square bales. If the bales are larger (round bales), obviously fewer bales would be required. Large round bales would likely provide at least 10X the coverage so likely in the range of 145 round bales
If a horse and a half can eat a hay bale and a half in a minute and a half how long would it take six horses to eat six hay bales?
It would take 12 bales of hay!!!
How much paint does it take to paint a wooden bunk bed?
1 Quart. ! quart of paint covers 100 sqft
12000 square foot home what size unit would it take?
A 12000 sqft home would probaly use more than 1 unit.
What size tractor is needed to move round bales of hay?
A tractor capable of lifting at least 2,000 pounds is best for moving round bales of hay. It would probably take a horsepower rating of about 40 or 50.
How many bundles of roof shingles will it take to cover a mobile home that is 1056 sq ft?
A square of shingles is 100 sqft. there are 3 bundles in a square. 1267 sqft is better rounded off to 1300 sqft to allow for waste. so 13oosqft dived by 100 sqft = 13 squares. 13 x 3 = 39 bundles.
How many btu does it take to heat a house of 2180 sq ft?
2180 SqFt/500 = 4.4 tons of AC required x12000 BTU/ton = 52800 BTU's Answer is it takes 52800 BTU's to cool a 2180 SqFt home
Which of the following is not one of the author's recommendations under the Comfort section?
Stop in fields to take naps on hay bales.
How many 16 X 16 stones do you need to cover 120 square feet?
68 but if you didn't include overage then get 75 Ok I am a designer so here is the basic formula to find out exactly how much of any form of flooring you should order except carpet. you take your 120 sqft and add 10% to that amount which should be 12 sqft. making your total 132. now you need to take that total and divide it by the number of sqft per box that the stone tile is sold in to figure out how many boxes you need to buy (reason for this is no one in their right mind will sell it to you per tile) lets say it comes 12.31 sqft per box. 132/12.31 = 10.72 now round this number up to 11 boxes (it is ok to round down if it is lower example- 10.12 can become 10 boxes) so if you want to know the square footage you take your eleven boxes multiplied by 12.31 and you get 135.41........Your squarre footage will always vary slightly depending on how many square feet there are per box. and on a further not I would add 15% to a squarefootage under 100 sqft
How much water does it take to cover 45000 sqft with 1 inch of water?
1 inch = 1/12 foot Volume = (45,000 ft2) x (1/12 ft) = 3,750 ft3 = 28,051.95 gallons (rounded)
How many square bails of hay does it take to weigh a ton?
It would depend on what type of hay how much it would cost, also whether it was a small square, a large square, a soft core bale or a hardcore bale. Small square weigh between 75 & 100 lbs, large square are around 800 lbs but can be heavier, soft core around 1200 lbs and large core up to 1800 lbs. It will also depend on whether there is a drought in the area where you want to buy bales.
