0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is different between torque wrench and impact wrench?
There's a world of difference. A torque wrench is a hand tool used to tighten fasteners to a preset torque specification. An impact wrench is a power tool which uses power actuated hammers to tighten a fastener for high torque applications.
When putting blades on a john deere mower is hand tighting good enough or do you need a torque wrench?
torque wrench. if you dont tighten it enough, it will work itself loose and then youll have problems
What is the best hand tool to use to tighten lug nuts?
There are a couple of different tools that are good for tightening lug nuts. A torque wrench and a lug wrench are good for tightening lug nuts. Typically lug nuts would be tightened with a torque wrench, but a lug wrench is much cheaper.
What's the best lug wrench?
The best lug wrench is the cross shaped type with 4 different sockets. This is the only hand wrench that will apply enough torque on your lug bolts.
What is the wheel lug torque setting on a 2000 Toyota Echo?
80 ft-lbs. The home mechanic can just use a regular wrench, tighten by hand, then step on the end of the wrench to torque it adaquately (don't stomp on it).
What is the wheel torque for a ford 250 1978?
Lug nuts you will want to tighten by hand with a lug wrench, so you can get them off with a lug wrench on the side of the road.
Why should you pull rather than push on a hand wrench?
It really doesn't matter to the nut or bolt, but you may get more torque by pulling it.
Why is it easier to turn a bolt with a wrench?
The longer handle gives you more leverage. You use Force to push or pull an object in an attempt to make it move. When you want to cause something to rotate (tighten or loosen a nut for example), you need Torque. Torque = the force you apply to your spanner times the distance your hand is from the nut you are trying to turn. Thus, if you have a longer spanner, you can place your hand farther from the nut and the Torque on the nut will increase. You have to be careful about long handled wrenches or slipping a piece of pipe over a wrench to make it longer as you can generate so much Torque that you can snap the bolt clean off or strip the threads. If you have to tighten a nut/bolt very firmly, but don't want to strip/snap it, you can use a Torque Wrench. It has a gauge that tells you how much Torque you are applying to the nut/bolt so that you can tighten it to specifications without going over.
How do you change the spark plugs on a 1995 Honda Civic LX?
You will need an extension for a socket, the correct socket (I think 5/8 will work), and a torque wrench. First, use the extension and socket to screw onto the spark plug. Once it becomes too hard to turn it by hand use the torque wrench. Once the plug is out, take your new one (I recommend NGK) and thread it into place without using the torque wrench. Then once it is too hard by hand use the wrench and tighten to the recommended number (most likely 19 N). Repeat for the other three plugs. If I were you I would also put anti-sieze lubricant on the threads of the new spark plugs. This will make it easier to remove the plugs next time around.
What are the flywheel bolt torque specs for a 1984 F250 with a 6.9 diesel?
Don't bother with torque specs, rust and worn bolts can make the torque innacurate. Just make nicely tight with one hand on wrench (DO NOT STRIP, A 12-POINT BOXED END WRENCH IS GOOD ENOUGH). You can also put anti-seize on bolts (only a little)... you never know if you will be the next person that has to remove them.
How many volts of power you need to take a lug nut that been but on by a air gun?
Volts of power? Your question makes no sense. To remove a lug nut use an air impact wrench or a hand wrench and just take it off. Volts has nothing to do with it even if you were using an electric air impact wrench. On an electric air wrench the power of the wrench is measured in torque not volts.
How do you torque head bolts without torque angle meter?
Torquing head bolts without a torque angle meter is substantially harder than with one but it is very much possible. All it requires is keeping a steady hand and a keen eye on your work.
