Want this question answered?
126-130 MPH. 2000 stock prowler. Front bumper removed.
Stock Curb Weight: just under 3800lbs (optional equipment increases weight)
The front speakers sre 6 1/2
I tow my boat with a tongue weight of about 140 pounds and a tow weight of 1500 pounds and the truch handles ok but the bumper has started to sag at the hitch
6/9 in the front and 5.25 in the rear
6x9in oval in the rear and 6in round in the front
Front 6x9 Rear 5 1/4
On stock (XL rated) tires, 35psi front, 41psi rear
Yes, but there will a much bigger gap between the bumper and the headlights than there was with the stock bumper. Additionally, when equipped with fog lights, the 01-02 bumper had different fog lights, so your new bumper may not come the new ones, meaning you'll have to either find a pair, or live with two great big holes in your bumper, that is of course assuming that the new bumper had fog lights.
1993 Dodge Shadow stock in reverce.
Turn the wheel so you can get to the 7mm screws on the front splash shield in the wheel weld.Remove those(appx.4 of them) There is 1 push-in fastener above the wheel.Then there are screws underneeth where the splash shield connects to the front bumper.(appx.6) Then there is a metal brace inside the bumper with 1 10mm screw. Next there are 2 screws at the top,right behind the blinker holding it to the fender. Across the front open the hood,between the head lights there are 4 push fasteners.Now do the same with the other side.Pull it strait forward to remove.Dont forget to unplug the front blinker lights before removing the bumper cover.
stock torsions are non adjustable, the adjustable ones you can adjust to your ride hight ....which lifts the front end for bigger tires..back always has that for bigger tires ..front doesnt..