that is not a do it yourself job, so it would be left up to you local auto repair shop, because you will have to have a vavle job done on the head to make sure the rest or sitting right
it would proubly cost alot
The valves can bend. You would then be repairing or replacing the engine.
Never heard of them being able to be changed.
Replace wheel cylinders and check rear proportioning valves.
I wouldn't you would end up having to replace most the system since wheel cylinders etc different, prop valves etc etc
i would recommend it just so you can see what the valves look like, i would hate for you to do it the other way just to find out later one of the valves is chipped or valve stem severely worn due to a very worn timing belt in the past.But its your call.
There are actually four valves in the heart: The tricuspid valve, mitral valve, pulmonary semilunar valve, and aortic semilunar valve. If you needed to list three different types of valves, you could consider both semilunar valves as one configuration type. Then you would have: Tricuspid valve, bicuspid (aka mitral) valve, and semilunar valves.
To overhaul a marine air compressor, you would first remove and replace hoses and fittings that are cracked or damaged. Valves can be checked for leakage and replaced when damaged.
Yes, but not only valves will be damage. Yes, but not only valves will be damage.
They would be considered incompetent valves because they are not working properly. You need all the vein valves to work properly for maximum functioning.
if the valves failed then the blood would go in the wrong direction.
Hey Dave==It is not necessary but probably recommended as it is possible that soon the valves will burn. It will also get rid of all of the carbon on the valves and let the engine breathe better.GoodluckJoe it is defanitly worth having a machine shope magna-flux the head for cracks and make sure the deck is straight. I would also replace any worn valves at the same time, but you should not have to repalce all of them.