Top Answer
User Avatar
Wiki User
2010-05-25 14:40:17
2010-05-25 14:40:17

The cleaning schedules varies from filter to filter, but a general guideline on any swimming pool filter is to take a reading when the filter is clean, then clean the pool filter when the pressure rises about 10 psi.


Related Questions

If you are going to clean the pool the best thing to do is hire a high presure sprayer.

A pool pump should only be replaced if and when it fails. A pool pump needs proper maintanance in order to function properly,and should last the life of the pool ith proper care.

how often are you to change the cartridge in a pump for an above the ground pool

If you live in a windy area or have debris getting into your pool then you should check the pump basket at least once per week or after you have vaced the pool.

When the pressure on the filter pump is above 20 psi.

form_title= Intex Pool Pumps form_header= Swim your summer away after you buy an Intex pool pump. What is the square footage of your swimming pool?*= _ [50] Is your pool a salt water pool?*= () Yes () No How often do you clean your pool?*= _ [50]

You should run your pump about 12 hours each day to keep water clean. You can put your pump on a timer to save money. Don't do that until your water clean and clear. If you are still working to get your water just right you need to keep your pump going full time.

About $30.00 of chlorine for an average in-ground pool and the cost of electricity to run your pump 24-7 until it is clean.

A thorough clean should be done at least once or twice a year. Check with the marker of your pond pump (on their website) and see what they recommend to do.

A self clean pool maintenance kit should include a vacuum with cleaning head and a skimmer with mesh netting.A maintenance kit in a pool package from cleaning professionals should include:Water Analysis KitBalance Pool WaterSkim SurfaceBrush WallsVacuumClean Pump StrainerClean Skimmer Basket(s)Clean Polaris® Bag (Where applicable)Clean TileClean HandrailsClean Diving Board and Stand (Where applicable)Clean Slide (Where applicable)Clean Pool Deck AreaCheck Filter Pressure Fill Chlorine Feeder/Floater - Chemicals not includedInspect Pool Equipment

Pump out the pool. Pressure wash the pool interior, remove debris. Finish with an acid wash. Check all plumbing for damage etc. Change out the sand in the sand filter (if fitted) Clean all skimmers and leaf filters at the pump and the pool. Fill pool and adjust it chemically after 24hours with pump running.

Sweep out any debris. Amend the chemicals and run the pump.

with a pool vacuum attached to your pump and filter available at most pool stores. or most old fashion people use a pool cleaning net

How often should you change water pump in a boat

you may have to prime your pump Clean or replace the filter.

Pools should be cleaned out in many different ways which makes how often this should be done to vary. The skimmer should be cleaned out daily. Vacuuming the pool should be done once a week but it can be done every two weeks if the time is not available to do so. The pump should be cleaned twice a season (this should be done throughly). Cleaning will be less necessary if the cover is kept on the pool consistently too.

form_title= Pool Pump form_header= Keep your pool in great condition with a pool pump. What is the size of your pool?*= _ [50] How old is your pool?*= _ [50] What type of pool do you have?*= _ [50]

Usually, there is a cylinder shaped canister near the pump. You have to remove top and lift filter out and clean thoroughly with hose.

I have an 18' round pool and i use a 1/2 HP pump. It should be more than enough.

Setting the filter to backwash cleans the filter, running your pump to filter cleans the water in the pool. Brushing the walls of your pool cleans the walls of your pool... and so on.

To keep your swimming pool clean you will need a filters and a water pump. A vacuum would as be a good idea.

Disconnect the pump from the power, disconnect the pump and motor from the plumbing, disconnect the motor from the pump, By now you should be able to pull the pump apart the impeller is the double disc with the water ports in it, These need to be cleared if there is any thing in them clear them and put it back together. Good luck.

Clean and empty in ground pool filter, clean and empty filter near pool pump. Be sure all whips are clear of dibris. also do a flush of the system. If this does not help, you will need to have a C02 charge done between the pool line and the pool pump. OR you may need to have your impeller replaced in the pool motor.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.