Want this question answered?
Hi, Always interpoles are connected in series with armature. N.V.B.V. Prasada Rao
DC shunt motor can be reversed by changing the polarity of either the armature coil or the field coil.
The commutator is a rotating switch, which reverse the polarity of the generated voltage every half-cycle. So it acts to rectify the output voltage.
Found one DC motor having small sparking,but the commutator is light and dark bar pattern.commutator is round. We 500kw dC motor operted at 500rpm with 480Amp's .The DC motor full load current is 1050Amp's. Why the commutator had small spaerking.
A: while a step can be of both polarity but it is a level change and it is DC LEVELS
Hi, Always interpoles are connected in series with armature. N.V.B.V. Prasada Rao
If you are talking polarity. DC motors automotive application run poss to neg. But any dc motor can reverse by changing polarity.
Reverse the polarity of armature windings of the motor.
in any dc machine changing the polarity of the field will change its direction. here, in series motor, the field is in series with the armature, to which we feed the supply. hence, change the feeding polarity.
DC shunt motor can be reversed by changing the polarity of either the armature coil or the field coil.
Its a motor that will do some work if you feed it some DC voltage. Reversing the dc supply voltage polarity will make it run in a reverse direction. The electric windows in your car is a good example of a DC motor's usefulness. The window up-down switches simply reverses the + and - polarity of the 12 volt vehicle supply to the window motor to make it take the window up or take it down.
the magnitude is decided by the amount of flux, number of conductors, speed of the motor and the type of the winding used. the polarity is decided by the direction of rotation of the motor and the direction of armature current flowing in the motor.
a general purpose D-C motor can be reversed by changing the polarity of either the armature or the field but not both
DC shunt motor can be reversed by changing the polarity of either the armature coil or the field coil.
Interpoles are similar to the main field poles and located on the yoke between the main field poles. They have windings in series with the armature winding. Interpoles have the function of reducing the armature reaction effect in the commutating zone. They eliminate the need to shift the brush assembly.
It would depend on what you are using. A direct current motor has a negative and positive terminals. If connected with the wrong polarity - red on black, black on red it will go into reverse possibly causing damage. Car batteries are used as dc. A lot of small appliances may be dc. Best to check the item you are using and connect the right polarity whether it's AC or DC.
by changing the ryb phase altornat e.g. rby ,bry , yrb we change the direction of the induction motor .. . ..