0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Should a serpentine belt be loose or tight on a 1994 camaro?
it should be pretty tight, but no so tight that it stretches it
How do you rout the auger belt on a montgomery wards snow blower?
Take all the belts off it first. The auger and drive are powered by the motor. The belt that powers the drive wheels will be closes to the motor and the belt that drives the auger will be closes to the auger. The space to attach the new belts will be on the motor side of the bottom pulley closes to the motor. Put the auger belt on the bottom pulley that's closes to the auger first but don't attach it to the top pulley. Next, put the drive belt on the bottom pulley closes to the motor- this belt can be attached to the top pulley closes to the motor. Now, the auger belt can be attached to the top pulley closes to the auger. Both belts have idler pulleys that keep them tight. These pulleys run on the outside of the belt. I use a bar when removing and replacing the belts inside of my fingers to guide the belts off the top pulleys. I make sure that the idle pulleys are the first and last that the belt gets attached to or removed from. These idle pulleys don't have to be removed for the replacement of the belts. I pull the starter rope slowly to help install the new belts. Remove the spark plug first. Accidental start ups can happen. The pulley/belt system can cause severe damage to your fingers- so don't use your fingers when guiding the belt on and off the top pulleys. Replace the belt guard if your snow blower still has one.
Why won't your snowblower auger blade engage?
possible broken auger belt, or one that has slipped off the pulley
Should you wear a belt if your stomach hurts?
You can wear a belt. Just do put it too tight.
How tight fan belt should be after replacing?
you would like about a 1/4" give in the belt
Why would the belt on a 1996 Kia Sephia squeal a lot but at random times if it is new and tight?
the belt may be too tight, you should be able to grab the belt and twist it around half way if you can't do that its too tight.
How tight should a fan belt be?
If it is a serpentine belt the automatic tensioner will adjust the belt for you. If it is an older "V" type belt--there should be 1/2" "play" at the middle of the belt, between the pulleys.
How many belts in a master craft snow blower?
the answer is two the larger belt is the drive belt and the smaller of the two is the auger belt.
How do you replace auger belt on craftsman snowblower model c950-52950-0?
you have to separate the front auger housing fron the back engine and drive housing. there should be several bolts on both sides you have to remove. once the two housings are separated you have to loosen off belt guard pins and pull the belt off. dissemble slowly so you can see how to reassemble
How do you replace the auger belt on your snow devil snow thrower?
how to change belt on snow devil snow blower
Auger that shoots the snow out the shoot does not turn fast enough 2000 year yard king.?
Check the tension on the belt that rotates the auger pulley.
How should my weight training belt fit?
The belt needs to be tight but not too tight. It needs to be tight enough that it helps but loose enought that blood circulation can return to normal. In other words, don't wear it so tight that it is cutting off your circulation.
