Want this question answered?
Remove the battery head(+v) for a while, then replace it and star the engine.
9006 HB4
Open the tailgate and look between the tail light assembly and the tailgates weather striping. You will see two galvanized Phillips head screws. Remove them and pull outward and the tail light unit will pop out. The bulbs are screwed into the back of the tail light assembly.
Remove the head light cover plate, then remove head light braket, once you have done that pull the light out and un-plug it.
There is a small slot on the hard plastic cover near the end of the dome light you will need a small flat head screw driver insert the screw driver in that slot use a back and forth motion to remove it.
HOW DO I CHANGE LIGHT BULBS
The timing light reset if i remember is behind the speedo. Remove the speedo head and clocks and look on the back. There should be a little jumper in some terminals and next to it there should be some empty terminals. Just remove jumper from one and put into other, this should reset timing belt light.
The timing light reset if i remember is behind the speedo. Remove the speedo head and clocks and look on the back. There should be a little jumper in some terminals and next to it there should be some empty terminals. Just remove jumper from one and put into other, this should reset timing belt light.
Remove the Philips screw on each corner of the bumper. Remove the clips that hold the grill and bumper to the radiator support. Pull the bumper forward. Remove the 10mm bolts that mount the head light to the radiator support. Remove the 10mm bolt that mounts the head light to the fender. Remove the 10mm bolt that mounts the head light to a bracket near the bumper beam.
You need to remove the head light, which is rather simple, and reach through the opening from the head light to replace the light bulb for the blinker.
May have to remove the head for access or to drill them out
To change the front head light you need to unscrew the screws to remove the protective casing. Once the protective casing has been removed the front head light bulb can be replaced with a new one.