Open the tailgate and look between the tail light assembly and the tailgates weather striping. You will see two galvanized Phillips head screws. Remove them and pull outward and the tail light unit will pop out. The bulbs are screwed into the back of the tail light assembly.
how do you clear air bag code in 95 toyota previa
Remove the engine fuse for 10 seconds and put them back simple
Remove the light assy then turn the bulbs countereclockwise to remove the bulbs.
lift tailgate and look for two screws and remove them, and then turn the bulb housing right and oull out
A flasher relay can be found at the end of the signal light lever on a steering column. Remove the steering covers and the light flasher will be visible.
Look in the trunk, there is a cover over the light assembly - open and you will have access to change the light.
Open trunk and remove screws that secure light assembly to car. Pull assembly straight back to remove from car. Remove the dead light and replace with proper new light. Install in reverse order of removal.
Question isn't clear. Are you asking how do you replace the bulb -OR- how to remove the entire lens assembly?
It's removed from inside the rear compartment. Open the rear hatch and on the inside of the light you will find a snap-off cover. open it and remove the light assembly with a 1/4 turn. The bulb assembly should pop out
Open the trunk; Remove the trunk liner; Remove the bulbs/wiring; locate the bolts securing the tail light assembly to the body; Remove the nuts; lift the assembly away. Cheers
pull out the battery or what ever is in front of it , or get a flash light and get your hands in there. it cant be that hard , you must atleast look at the back or call Toyota to see if it is poossible to remove the bulb and how to do it
On a 2012 toyota Highlander, How do you replace tail light Assembly