The 2001-2007 Chrysler Town & Country Van takes a fairly standard 16" rear wiper blade which uninstalls/installs very similar to the front wiper blades. Most replacement windshield wiper blades will come with easy-to-follow, step-by-step illustrated removal and replacement instructions and once you get the wiper, wiper arm and instructions in your hands, it is a very simple 5-15 minute task usually not requiring any tools.
remove the 15 mm nut and rock back and forth
The wiper switch on a 1998 Chrysler Town and Country gets power from and is an input to the body computer.
Yes.
Yes
The wiper cowl is the area at the base of the windshield that houses the wiper motor.
The wiper motor is under the plastic cowl, at the base of the windshield.
Remove wiper arm then remove inside trim panel being careful not to crack it then remove motor connection then motor
It varies depending on the model year of the Chrysler Town & Country. See sources and related links below to lookup correct wiper blade sizes by model year.
I access them from underneath, other people remove the wiper cowl and intake plenum.
From the top you will need to remove the wiper module and have a cold engine. You can also remove the plugs from under but you will need a lift and cold engine.
The 2002 Chrysler Town & Country Van takes 28" replacement windshield wiper blades on both sides front and an 18" rear wiper blade. See sources and related links below for more informaton.
To replace the rear wiper blade on a Chrysler Pacifica, you must first remove the old blade. You can remove it by pushing the small blade that holds the wiper in place up, and push the blade back. Once the blade is free from the hook remove it. Put the new blade in position so the hook is in position to go over the wiper attachment. Clip it into position and you are done.