Very easy. All you need is a #4 or #3 Phillips screw driver. Lift the hatch and observe where the tail light assembly aligns to the inside of the car. You will see 2 black Phillips screws that fasten the assembly to the body. Remove the screws and gently pull the assembly out. Start from the end of the tail light assembly where you removed the screws. After the assembly has been pried free you can remove the lamps. All you need to do is give the socket a quarter turn by hand counter clock wise. The bulbs (lamps) pull out and push in
no it will not
mercury sable
The 2000 Mercury Sable starter can be found on the right hand side of the engine. The starter will be near the back of the engine.
The 2000 Mercury Sable starter will have three retaining bolts. There will be two cable retaining nuts on the front of the starter.
on the steer wheel
On a 2000 Mercury sable : firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
torque specs 2000 mercury sable 3.0 12V rod bolts
by the radiator. black box.
In a 2000 Mercury Sable : The thread on cap on the engine coolant reservoir is the pressure cap / radiator cap
There is a thermostat on all cars.
According to the 2000 Mercury Sable Owner Guide : Motorcraft MERCON automatic transmission fluid is used as the power steering fluid
According to the 2000 Mercury Sable Owner Guide : ( Motorcraft MERCON - V , automatic transmission fluid in both types of automatic transaxle / transmission )