I need to change the spark plugs on my 1.2 lt 52 Polo, but I can't get the plastic cover off Answer: It is very easy. Grab front and backside of the plastic cover and pull hard. It might feel like you will break the cover, but you will not. Note that underneath the right hand side of the cover you will find at hose that is clipped on to the block of your engine. It might be a good idea to unclip this before removing the cover. Use a flathead screwdriver. F
12 spark plugs for a 12 cylinder engine.
Use a 12" ext. With a universal (swivel)
You will need 12 bocsh spark plugs. These engines have 2 spark plugs per cylinder.
Remove the engine covers and carefully remove the ignition wires from the spark plugs, there are 12 of them, then remove the spark plugs with a 5/8 plug socket. Make sure the gap is correct on new plugs put a bit of anti seize on the threads then install the new plugs...
Spark plugs receive electrical power from the ignition system. This uses a transformer (the coil) to change 12 v power to several thousands of volts. This high voltage current is carried to the plugs by the plug wires. When the electricity jumps the gap between the electrodes of the plug, it makes a spark.
Yes
it not uses 12 spark plugs, it uses 24 sparks plug due that was the original design from ford's engineerings
12, 2 per cyliner
12.
12
12 if the V6 version.
12. If it is a c320 V6 it takes two plugs per cylinder.