Loosen the bolts holding the alternator in place and then loosen the bolt on the bracket with the slot. Slide the alternator down the slot until the belt is loose enough to remove. Install the new belt and the slide the alternator back until the belt is tight. Now you need to set the belt deflections. When free span is less than 12 inches between pulleys, belt deflection should be 1/8 to 1/4 inch. When free span is longer than 12 inches, belt deflection should be 1/4 to 1/2 inch. Check the deflection by pressing the belt halfway between pulleys. Tighten down all bolts to 30 lb/ft of torque.
when do you change cam belt and when do you change timing change
Call racv lol
I need to change out the alternator on my 2001 f150 supercrew. how do I do it?
how do you change 2004 kia sorento alternator belt
Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.
The alternator belt is classed as a "stretchy" belt by Ford and is not re-usable.
Remove the belt by using a 3/8 ratchet in the belt tensioner below the alternator. Insert the ratchet into the tensioner and push to loosen the belt. When the belt is loose, remove it from the alternator. Remove the electrical connections from the alternator. Then remove the 3 mounting bolts. The alternator should now be diaconnected from the engine. Installation is the reverse.
take off the drivers side tire, then the plastic splash gaurd. alternator will be right there
it's all one belt
can you change the alternator belt in a 1998 Chevy metro from under the car.
The alternator is belt driven off the front of the engine.
Begin by removing the alternator tensioner bolt. Slide the alternator to the left. Remove the alternator belt. Reverse the process to install the new alternator belt.