I also have a 1998 Saturn SL1, and I had to do this a while back. You should probably park in the part's place's parking lot while you do this, that way if you get anything the wrong size you can deal with it right there.
1. Open the trunk
2. Get a small screwdriver bit, shaped like a six-pointed star. In my set it's called a T-15. Use this to remove both screws on the side where the light is out. DON'T lose the screws.
3. Pull off the light casing.
4. Push the lever and twist off the cap for whichever light is out. There are simple directions on the cap. The light bulb should come out with the cap.
5. Unscrew dead lightbulb and replace with new one.
6. Follow directions in reverse order to put it back together.
Good luck!
It is quite simple to change the brake light switch on your 1998 Chevy S 10 pickup truck. The brake light switch simply plugs in and out.
You will need to remove the 1998 Chevy Camaro brake light wiring harness. Remove the brake light retaining screws. Reverse the process to install the new brake light.
how to change a rear break light on a 1998 nissan frontier four cylinder?
1998 GM Saturn (all models) have rear brake shoes
Probably located at top of brake pedal secured by 2 locknuts and 2 wires
Change front brake rotors on a 1998 Hyundai Accent?
Change the bulb and check to see if it's not grounding out.
The 1998 Nissan brake light switch is located below the dashboard, on the drivers side of the engine compartment. The brake light switch simply plugs in and out.
brake light on dash blinking
Which brake lamp are you needing to change? Brake/turn signal lamp.
the brake light switch is on the top of the brake pedal arm. under dash.
check you oil level on the dipstick. add some or get an oil change.