Want this question answered?
Change the valve cover gasket.
The timing marks on a 1994 Toyota Corolla are located on the crankshaft cover. The crankshaft cover is usually located at the very bottom of an engine.
from looking at the owner's manual, you can just cover the sensor located at the top of the driver side dash.
Look in the trunk, there is cover for the brake light, remove and you will have access to change the bulb.
Look on the cover of the fusbox there's a map.. of the fusebox idiot!
The PCV valve on a 1998 Toyota Corolla is located on top of the engine, on the passenger side. It connects the intake manifold with the valve cover.
I've had several Toyotas , but not that model. Every Toyota I've had put the fuses somewhere near the driver's feet: in a kick panel on the side, or hanging under the dashboard. If you get down there and look around you should find a compartment cover you can open. Of course, if you have an owner's manual the answer will be there! :-)
A fuse box diagram is found under the fuse box. There is a sticker imprinted underneath the cover of the box a 1990 Toyota Corolla.
Remove the cover from around the brake handle by removing the two screw in the lower front and the two bolts inside the center console. Remove the top locking nut from the cable and then turn the other nut clockwise to adjust the brake.
Changing a rear license plate light on a 1991 Toyota Corolla will be very easy to do. You need to take the license plate off and then unscrew all the plastic screws holding the light cover in place. After the screws are out, remove the cover and unscrew the old bulb and replace it with a new one.
take off the engine cover then you will see the 4 spark plugs on top remove the rail first then they will just pop off DON'T FORCE THEM OFF OR YOU WILL BRAKE IT
The fuse box diagram for a 2003 Toyota Corolla CE is located on the rear of the box cover. It can also be found within the service manual.