Drain off the radiator coolant into a clean drain pan. Loosen radiator hose clamps. Remove radiator hose. Install in reverse order.
No, you do not have to remove the engine to replace a radiator hose.No, you do not have to remove the engine to replace a radiator hose.
only way to change lower radiator hose is to get underneath the vehicle there is a fawcet on bottom of radiator to dump coolant, then remove hose from underneath vehicle
\ follow top radiator hose to engine on most cars
unhook the lower radiator hose from the engine, and there it is... you just pull it out, put the new one in, hook your radiator hose back in and your done.
1. Open the radiator cap. 2. Disconnect the top radiator hose. 3. Run the engine for a couple of minutes with the hose off. 4. Insert tap water hose into the radiator where the top hose should be. 5. Run water into the radiator until clear water comes out of the radiator top hose. 6. Continue idling the engine, remove the tap water hose from the radiator, shut off engine as soon as the water stops coming out of the top water hose of the radiator. 7. Reconnect top water hose and fill radiator with antifreeze. Start engine and top off antifreeze.
Under where the upper radiator hose hooks to the engine.Under where the upper radiator hose hooks to the engine.
In most cases the lower radiator hose feeds the water pump. The upper radiator hose feeds the radiator.
It is under the housing on the engine that the upper radiator hose hooks to.It is under the housing on the engine that the upper radiator hose hooks to.
1993-1997 it is under the housing where the upper radiator hose attaches to the engine.1998-2004 it is under the housing where the lower radiator hose attaches to the engine.1993-1997 it is under the housing where the upper radiator hose attaches to the engine.1998-2004 it is under the housing where the lower radiator hose attaches to the engine.
2.7l and 3.5L, it is under the housing where the lower radiator hose hooks to the engine.5.7L and 6.1L, it is under the housing where the upper radiator hose hooks to the engine.2.7l and 3.5L, it is under the housing where the lower radiator hose hooks to the engine.5.7L and 6.1L, it is under the housing where the upper radiator hose hooks to the engine.
follow the top radiator hose to the engine. that is where your thermostat is. you will have to drain the radiator, remove the engine side of the hose and remove the thermostat housing to access it. remove thermostat clean mating surface of housing and engine, install thermostat, install housing, secure radiator hose, fill with coolant. start engine and check for leaks.
1993-1997, it is under the housing where the upper radiator hose hooks to the engine.1998-2004, it is under the housing where the lower radiator hose hooks to the engine.1993-1997, it is under the housing where the upper radiator hose hooks to the engine.1998-2004, it is under the housing where the lower radiator hose hooks to the engine.