the starter is in the back of the moter. frist disconet the battery. the disconet all the wires from the starter. there should be two bolts holding it on. take them off and
will a 91 Mitsubishi eclipse body parts fit a 91 ford probe
Jack up the front of your 1991 Mitsubishi Eclipse. Remove the brake pad assembly. Loosen the brake rotor by tapping on it with a hammer or mallet. Slide the brake rotor off. Reverse the process to install the new brake rotor.
yep need a dif ecu though
Get a manual if you need pictures and it will tell you how also.
There is no 1991 VW Rabbit.
bad switch off the steering column.
I have a 1991 Eclipse GSX and it wasn't getting spark. I tried everything it turned out to be the ECU. It is mounted in the center console of the car. You have to take off the carpet in order to access it.
Front of the transmition
You will have to test the resistance on it to make sure it is within specs.
you have to take the starter out of the car and dismantle it.....it's an integral unit
On the passenger side of the motor (by where the radiator cap is at) where the upper radiator hose goes to the engine. that is the placement on a 2.0.
Follow the instructions on Youtube.
hi there who can help me
It is located behind the center console near the ECM. It is large and gold in color
Same answer as: "How do you replace a starter on a 92 Geo Prism LSI or GSI?" at this same site.
1991 mitsubishi eclipse 2.0L starts 2 to 3 seconds later shuts off
You can buy a Haynes manual at Autozone. There is wiring diagrams and other trouble shooting things in the book.
Mitsubishi RVR was created in 1991.
Remove the battery cable from the positive post of the battery. Remove the cables from the starter. Remove the starter retaining bolts. The starter will come off. Reverse the process to install the new starter.
Look on top of the compressor for the low side compressor valve.