0
The water pump is behind the smooth pulley up top closest to the front of the car.
1) Warm engine fully.
2) Stop engine.
3) Drain coolant.
4) Slightly loosen water pump pulley bolts. If necessary, us a long open-end wrench on one bolt (2 mm larger than correct size) to hold the pulley from turning while using a correctly fitting 6-point socket to loosen another bolt.
5) Loosen the belt tensioner and remove the belt.
6) Unbolt and remove the water pump.
7) Use scotch-brite to remove any old gasket material.
8) Position new pump and gasket in place and install the (five?) bolts.
9) Position pulley in place and snug up four bolts.
10) Reinstall belt and tighten pulley bolts fully.
11) Fill cooling system. You should use a vacuum type fill tool if available, otherwise be sure to remember to open the bleeders.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Where can you find a diagram of 1994 Pontiac grand am motor?
where can you find a diagram of 1994 pontiac grand am motor?
How do you do a front-end alignment on a 1994 Pontiac grand prix?
How do you do a front-end alignment on a 1994 pontiac grand prix?
Would a headlight for a 1997 Pontiac fit a 1994 Pontiac grand prix?
No.
Power steering 1994 grand am problem?
problem with power steering 1994 Pontiac grand am 2.3L
What is the correct alignment marks on a 1994 Pontiac Grand Prix?
what is the correct alignment marks on a 1995 Pontiac grand prix
Where can I find fuse box diagram for 1994 Pontiac grand am?
Fuse box for 1995 Pontiac grand am - door lock
Is 1994 Pontiac firebird front wheel drive?
no their not front wheel drive you must be thinking of a Pontiac grand am or a grand prix
What type of refrigerant is used in a 1994 Pontiac Grand Am?
134a
How do you replace the timing chain on a 1994 Pontiac Grand Am?
if its a chain^
What is the weight of a 1994 Grand Prix weigh?
1994 PONTIAC GRAND PRIX SE COUPE CURB WEIGHT: 3280 LBS.
How do you change the oil on a 1994 Pontiac Grand Prix?
with an oil drain pan and a socket...make sure you have more oil to put back in...
How do you change a tail light bulb holder for a 1994 Pontiac grand am?
Cut the wires on the old fixture and splice wires from new receptacle
