use an "easyout" works great on bolts in any condition
The torque of a water pump bolt can be requested from the manufacturer. The Chevy Trailblazer has a high torque for the water pump bolt.
How do I replace the water pump in my 1994 Saturn SL2 series standard twin cam.
Remove the power steering pump. I just did a water pump. If you remove the top PS pump bolt and loosten the lower PS pump bolt about 1/2 way you can push the pump over with one hand while removing the water pump bolt.
The water pump on a 94 Saturn S1 is replaced by removing the serpentine belt, engine accessories, and water hoses. The pump can then be unbolted from the engine block and a new pump put in place.
The water pump on a 1996 Saturn sl2 is located in the engine compartment. It sits below the AC compressor.
which bolt
the water pump on the 4.3L vortec is easy. there are four bolt holding the water pump in place. these bolt hold your fan clutch also. the water pump and fan system.are built as one. remove these bolts and you are ready to change your water pump.
The steering pump is attached with 2 bolts. If you take the top bolt out and loosen the bottom bolt until it's almost completely out, you can move the pump/pulley enough to snake that bottom left water pump bolt out.
Yes the water pump is mechanical. its driven by the serpentine belt. Please visit my profile for a link to my Saturn help site for location of the water pump
It could be either, by far most are 3 bolt.
The 1999 to 2001 Dodge ram 1500 pickup truck water pump bolt pattern consists of two bolts on each side of the water pump. A picture of the bolt pattern can be obtained from most auto-parts stores.
From the pictures I've seen on AutoZone.com, it seems to be a standard water pump. The only trick I can see is to break the pulley bolts free before you remove the bolt. Good Luck!!