Top Answer
User Avatar
Wiki User
Answered 2014-11-19 22:56:46

Many models of RCA TruFlat have HDMI ports and/or stereo RCA connector ports, and most DVD players nowadays come with one or the other. If your DVD player comes with something other than one of these two, it might not connect properly. However, all it should take is plugging the right cords into the right ports.


Your Answer

Related Questions

If the T.V. has RCA inputs then you should just be able to hook the red and yellow wires into the TV from the DVD player. It should play

You cant it is impossable to put a broken DVD player to a tv if it doesnt work buy a new one!

The DVD player will connect directly to your TV. Our receivers only have output ports not inputs.

Any reputable combo player will be able to hook up to an HD TV.

To hook up a DVD player and a VCR to an old RCA TV, you will need to examine what type of inputs are available on the TV. The VCR can probably be connected with a coaxial cable. The DVD player will need to be either hooked up with RCA cables or with an S-video cable and two audio cables.

vcr out into DVD in, DVD out into tvhd in

All you need is a HDMI 1.3 Audio/Video cable to hook up your Blu-Ray player to your TV.

A VCR DVD combo player is typically hooked to a TV using RCA connectors. They are color coded and connected to the same ports on each device.

Depending on the vehicle if it has a LCD or Navigation you can use a NAV-TV Video interface to add a DVD player to the car- in some instances the vehicle comes equipped with a factory DVD, you can use the DVD Bypass from NAV-TV to have Video in Motion.

The Hannspree 10-Inch MLB White Sox LCD Television comes with a remote control, it does not have a dvd player built in but it has an A/V input that will allow you to hook one up.

how to connect dvd player to satellite tv?

You have to buy a box that converts the signal from the DVD player into an RF signal. These can be found in the electronics department of most stores, or at Radio Shack.

Hooking up a DVD player to an old Magnavox TV would involve using RCA cables to connect it. Find the red, yellow and white jacks and attach them to the proper wires.

I have a AV surround sound VR-206 and I want to hook up my digital cable receiver and my DVD player but I want to be able to watch tv programs without using the amp

First, run the coaxial cable from the wall to the PVR. Then, hook the coaxial cable from the PVR directly to the TV. Now take the DVD players RCA or HDMI plug, whichever you use, and hook it up to the television directly.

That would depend on the ports available on your TV, and DVD player which would determine if you are even able to do so.

A dvd television is a television that has a dvd player built in. It can be used just as a regular television or a dvd can be put into a slot and watched.

An LCD TV DVD is basically just an LCD TV with a DVD player built into it. However, a blueray player is different because first of all, it is not built into the tv and is a separate component. Secondly, it is a higher quality DVD player.

Read the instructions that came with them.

It is probably best for you to get the two separate. If there ends up being a problem with the dvd player within the tv you might ruin your tv. Plus the dvd player probably is better quality if it is separate.

This Netbook has no DVD Drive. You will be able to hook up a wireless internet connection.

You can plug it into a TV and watch whats on the DVD player, throught the tv.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.