you might need to remove the black air ducting on the inside, and the glove box area the heater core is behide the glove box ( be carefull not to break the black box that is the air duct and your a/c won't work if you do) I think it has two lines that run in to it you will have to work with it to get it out, it takes time and patience it will come out from the under of the glove box on the inside of the truck (I hope this helps you out)
Remove the wiring harness from the back of your 1980 Chevy Camaro heater blower motor. Remove the blower motor retaining bolts. Remove the fan from the front of the blower motor. Reverse the process to install the new blower motor.
under right side of dash near blower motor
Do you already have the old one out?
Remove the wiring harness from the back of your 1996 Chevrolet blower motor. Remove the blower motor retaining bolts. Remove the fan from the blower motor. Reverse the process to install your new blower motor.
Begin by removing the wiring harness from the back of your 1974 Beetle blower motor. Remove the blower motor retaining bolts. Remove the blower motor fan. Reverse the process to install your new blower motor.
where is blower motor resister located on 2001 GMC Yukon
The heater blower motor can be found beneath the passenger side dashboard. Remove the wiring harness from the back of the blower motor. Remove the blower motor retaining bolts. Reverse the process to install your new blower motor.
Yes, there is a fuse for the blower motor.
Depends on what you mean by heater will not work. If the blower motor will not work, it can be a blown fuse, bad blower motor, bad blower motor switch, or a defective blower motor resistor pack. If you mean that the blower motor works but there is no heat, then it can be a clogged heater core, thermostat stuck open, or defective heater control valve.
Remove the wiring harness from the back of your 2005 Chevy Cavalier heater blower motor. Remove the heater blower motor retaining bolts. Remove the heater blower fan.
The a/c heater blower motor resister is located in the vehicle on the passengers side inside the housing next to the blower motor...............Remove the blower motor resistor wire harness connector.Remove the blower motor resistor screws.Remove the blower motor resistor.
the heater resistor needs to be replaced it is mounted in the heater box next to the blower motor