turns ratio is 2 : 1
for more you need a bit more information
Yes, you can jump a 6V system with a 12V battery, but it requires caution. Directly connecting a 12V battery can damage the 6V system due to the higher voltage. It's safer to use a voltage regulator or a step-down converter to ensure the 6V system receives the appropriate voltage without risk of damage. Always check the specific requirements of your equipment before attempting to jump it.
No, you should not jump-start a 6V battery with a 12V battery, as the higher voltage can damage the 6V battery and any connected electrical components. Instead, use a compatible 6V battery or a dedicated jump starter designed for that voltage. If necessary, you can use a 12V battery with a proper voltage regulator or a step-down converter to safely charge the 6V battery. Always follow safety precautions when working with batteries.
12v
The battery is a 12V car battery.
A: The VA rating is there 6v/a the power fuse to blow is 6watts. 050a fuse
It is unlikely
Probably...The 6V 40A relay figures out as 240Watts...The same relay at 12V 30A figures out as 360Watts.
Usually 6v, can be 12v.
No, you need at least 12v to charge 12v. Most alternators charge at 13-14 volts.
The same as a 12V relay circuit, except it only needs 6V instead of 12V.
To determine if an ignition coil is 6v or 12v, check for any labeling or markings on the coil itself, which often indicate the voltage rating. You can also measure the resistance on the primary winding using a multimeter; typically, a 6v coil has lower resistance (about 1-3 ohms) compared to a 12v coil (about 3-6 ohms). Additionally, the coil's application can be a clue, as older vehicles often use 6v systems, while most modern vehicles operate on 12v.
A simple test with a volt meter will give you the answer.