0
Open the door, support it with a jack, remove the hinge spring. To remove the pin, you should have to remove a retaining clip at the head of the pin and then tap it out with a hammer.
The upper hinge has two bolt secured bushings. Unthread the bolts, tap them out with a hammer and pull out the bushings.
Make sure the door is held secure, as it will be free floating at this point.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you change the door hinge on a 1990 Camaro?
The '90 camaro has three bolts that hold the door hinge to the body and I believe three that hold the hinge to the door. The easiest way I've found is to score the position of the original hinge location and remove the bolts with the appropriate wrench with the door open. Be sure to have the door supported because it will try to sag. Once the new hinge is in place, align it to the original hinges location and tighten your bolts down.
How can you fix a broken door handle on a 1991 camaro rs?
Remove inner door panel for access
How do you repair a broken door hinge on a 1991 Cherokee Briarwood where it should be welded onto the frame?
To repair a broken door hinge on a 1991 Cherokee Briarwood, a new piece of metal should be welded in to hold the hinge. Then, a new hinge should also be welded in that is aligned with the door pin.
How can one replace a cabinet hinge?
To replace a cabinet hinge, you must first remove the screws that attach to the door with either a screwdriver or a drill with screw bit. Next you want to remove the cabinet door. Once you have removed the door, remove the hinge from the cabinet. You can then attach a new hinge. A nice tip is to have a partner hold the door while you screw the hinge back in place.
How do you replace door hinge bushings on a 1993 Nissan Sentra?
Have to remove the door, then remove pins and bushings
How do you remove welded on door hinges 02 Avalanche?
Buy a hinge pin and bushing kit then rebuild the hinge on the vehicle and avoid trying to remove the hinge off the vehicle.
How do you remove the passenger side rear door of a 1997 Nissan Pathfinder?
support the door then remove the hinge to door bolts and lift door off.
How do you replaced a car door?
Open door look at the hinge remove two pins holding it on and remove door place it on ground, pick up new door put pins back onto the hinge well holding door and you should be done.
Will 1999 Camaro door panels fit a 1991 Camaro?
No, they're 2 totally different bodystyles
How do you adjust the front fender on an 1981 camaro it is rubbing on the door?
by using only the information given, your answer is to replace the lower door hinge pin and bushing.
How do you remove the pins to change a door on a 1989 Buick?
You do not remove the pin. Remove the bolts holding the entire hinge from the door. You need a helper to do this, and will need help aligning the new door. Mark the location of the old hinge with a marker around the outer edge of the hinge and replace it as close as possible in the exact same location.
How do you remove hinge pin in the side door?
you have to lift the door up and use a hammer to hit it
