Using a screwdriver, remove all the screws and bolts from the panel. Remove the panel and pull it away slowly.?æ
how to remove the door panel of a 1995 s10
Using a screwdriver, remove the screws and the clips from the cars door panel. Pull the panel away from the frame, remove the wiring connections, and the panel will come free.
Open up both front doors and remove everything from the front seat to the firewall, no kidding.
To remove the door locks on a 1991 S10, the door panel has to be removed. There are bolts inside that hold the lock mechanism in place.
You will have to remove all trim that surrounds the speaker enclosure. Then remove the panel that houses the speaker. The speaker is removed from the rear side of this panel.
Lift the front of the vehicle up and support it with jack stands under the lower a-frames. Remove front wheels. Unbolt front shocks and remove them. Reverse order to install.
How am I suppose to answer the question if I originally don't know? my 1992 is behind a kick panel front passenger side
Open both front doors and remove everything from the front seat to the firewall, no kidding.
If this S10 is a 4+4, the seal and bearing is not serviceable. The hub and bearing assembly is replaced as one unit.
If your looking to remove the entire dash assembly I would recommend purchasing a shop manual to guide you thru it.
Quarter ton
Open both front doors and remove everything from the firewall to the front seat. No joke.