Caution:On models equipped with Delco-Loc 2 or Theftlock audio systems make sure you have activation code * Disconnect the negative battery cable * Drain the cooling system * Disconnect the heater hoses at the heater core inlet and outlet on the engine side of the firewall and plug the open fittings * From the inside of the car remove the lower right dash insulator panel and the glove box * Disconnect the ducts from the heater cover * Remove the instrument panel from the passanger compartment * Remove the heater core cover * Remove the heater core clamp bolts and clamps then slide the heater core out carefully * Installation is reverse of removal
The water from your 1989 Chevrolet Cavalier cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Drain the water from your 1994 Chevrolet Cavalier cooling system. Remove the water supply hoses from the heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
Detach the screw that attaches the heater duct on a Chevy Cavalier and remove the heater core. Once this is done you can replace the faulty heater core with a functional one.
how do you remove the heater core and hoses from 1996 Chevy sub 5.7 K1500
Disconnect the heater lines going into the fire wall from under the hood. Remove the panels from under the dash. At this point you should be able to remove the heater cover and remove the heater core.
Your 1996 Chevrolet Corsica cooling system. Remove the water supply line and the water return line. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
The 1996 GMC half ton pickup truck heater core can be removed by removing the heater core retaining bolts. Remove the heater core water lines. Reverse the process to install the new heater core.
Lift up the vehicle and support it with jack stands and remove the two heater hose near the firewall. The heater core is in the center inside the vehicle and once you have removed the left and right covers you then need to remove the lower panel that the heater core is in and remember to pull the core back straight..........
The heater core can be found behind the passenger side kick plate. Remove the water supply hoses from your 1996 Chevy Impala heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
please tell me how to remove the heater to get too the heater coil
You have to pull the dash and all the lower fascia, then remove the box that houses the heater core. Take the clamps off the heater hoses from the engine compartment side of the firewall and disconnect the heater hoses. Disconnect the bracket that holds the heater core in place from the inside of the passenger compartment (if present.) Carefully remove the heater core and discard it. Install a new heater core reversing the above steps.
herman_love