push a littlle harder keeping even pressure as best you can. when i removed mine I layed in the back an pushed it out with my feet and had someone else outside helping to menouverit and eventally to catch it !
Just remove sidings from the door (inside), then remove all bolts you will see, i think 6 pcs. then you can easily figure it out how you will remove the motor from the door shell.
This is not an easy job. You have to remove the trim pad first. TAke it to the auto trim shop.
The window winder is secured by a spring wire clip. Push the circular pad away from the winder handle and pull out the clip with a crochette hook or similar.
the window switch is bad
You can remove the panels from the doors of the 1997 Mitsubishi Colt 1.3 GLX by first removing the screws from the door handles. Then, pry the panel away from the frame using a flat tool like a chisel or a screwdriver.
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
under the bonnet
Remove the inside door panel of your 1982 Chevy Corvette. Remove the window retaining clips. The window will lift out.
either on the door or right below the front window
Remove the inside door panel of your 2002 Chevy Cavalier. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
Remove the inside door panel of your 1994 Chevrolet Corsica. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
To remove the rear window regulator on a 1994 town car, remove the screws under the arm rest. Take off the rubber insulation and unplug the speaker wires to get it our of the way. Finally, remove the window regulator.Ê