Ik begin met het probleem en dat is de lichtschakelaar. Achter de schakelaar zit een pennetje dat ingedrukt moet worden om de knop eraf te kunnen trekken. Hoe je daar bij komt is een lastige want het hele dashboard zit ervoor. De makkelijkste manier is om de bovenkant van het dashboard te verwijderen. De ring achter de knop losdraaien. De knop van ruitenwissers kun je er vanaf trekken en de ring losdraaien. Uiteraard aansteker verwijderen en de ring losdraaien. De knoppen van de ventilatie hebben een palletje achter het glimmende gedeelte, dit indrukken en knop lostrekken. Het palletje kan aan de onderkant of de bovenkant zitten afhankelijk van hoe de knop er opgedrukt is. Schroef verwijderen aan onderkant dashboard (onder stuur) zodat plaatje verwijderd kan worden. Schroeven verwijderen aan onderkant bovenkant van dashboard waarna plaat verwijderd kan worden. De klokkenplaat zit nu alleen nog met clips vast die je los kunt trekken. Succes.
Remove the instrument panel cover. Remove the instrument panel retaining screws. Remove the wiring harness from the gauges. The instrument panel will come out.
there is no layout for this fuse panel, contact the dealer for that answer.
remove plastic around instrument panel . remove screws from instrument panel then pull panel towards you to unplug it this will allow to get to dach lights
How do you remove the instrument panel in a 1998 Ford Expedition 5.4 Engine
Remove the inside door panel. You will be able to see the entire window mechanism. Remove the obstruction that is keeping the window from closing.
The fuse panel in my 1971 is in the glove box behind a panel on the right side.
Remove center stack bezel (radio, heater control), remove screws from instrument trim panel at ctr stack and remove instrument trim panel, remove dash top panel, replace speakers.
Behind LH Side Of Instrument Panel
remove the trim panel around the instrument cluster then remove cluster. On the back of instrument cluster are the bulbs just turn them half a turn and they come right out.
To remove the instrument panel from the 1998 Mitsubishi Eclipse, carefully pull back the pod. Take care not to lose any of the clips.
with a hammer
Remove the instrument panel cover retaining screws. There are four screws that need to be removed. The instrument panel light bulb's will be visible. Push the light bulb in and turn at the same time to remove the light bulb.