Follow the plug wires to the 4 holes that go through the valve cover shroud. Carefully remove the wires - using the appropriate metric size deep-socket spark plug wrench w/an extension bar and handle, remove the spark plugs by twisting countre-clockwise. Remove the plugs and after setting the electrodes to the proper gap, carefully replace the new plug into the hole BEING VERY CAREFUL NOT TO CROSS-THREAD the plug. Tighten the plug(s) and re-attach the wires.
Get a spark plug socket and unscrew the spark plug and replace with a new one.
I want to know
through the tire wells
Disconnect the battery, remove the spark plug cables, and remove the old spark plugs. Put in the new spark plugs, attached the spark plug cables, and connect the battery.
Disconnect the battery, remove the boots and wires, and remove the old spark plugs. Put in the new spark plugs, reattach the boots and wires, and connect the battery.
will be either,ignition coil,,or module,,easy to replace
how to change spark plugs on a 2001 expedition
TAKE OUT THE OLD SPARKPLUGS AND PUT IN NEW ONES
Remove the 4 screws holding the top cover. You can then get to the plug wires and the plugs.
there are four spark plugs.
The correct torque is 13 ft/lbs.
http://my.is/forums/f67/is300-changing-spark-plugs-340989/