Ford Explorer
Turn Signals and Hazard Lights
How To

How to replace a front turn signal lens in a 2002 Ford Explorer?


Top Answer
User Avatar
Wiki User
2006-04-25 03:20:32
2006-04-25 03:20:32

There are two screws on the inside of the tail gate, where the hatchback goes down. Remove those two screws and gently pull the light assembly out. There are two bulbs that can be replaced. Real easy to do.


Related Questions

How do you replace a power window motor ( rear passenger side ) in a 2002 Ford Explorer

The 2002 Ford Explorer has 39.9 in. of front head room.

The 2002 Ford Explorer has 59.1 in. of front shoulder room.

The 2002 Ford Explorer has 55 in. of front hip room.

The 2002 Ford Explorer has 43.9 in. of front leg room.

The front track of the 2002 Ford Explorer is 5 ft. 0.9 in. (60.9 in.).

2002 ford explorer turn signals not working

How to Install Front Brake Pads Check related link below for picture and video

How do you replace a turn signal bulb in a 1998 cavalier

Unplug the whole light assembly from the bottom front of the car it just pops out to replace the turn signal bulb-same on the rear but you have to remove the trunk lining first.

yes but you have to buy a spacer for the front tires

sorry , no ( the 2002 Ford Explorer 4 door is a redesign - generation 3 )

Your dealer should do it because the grill and radiator must be removed to get to the turn signals.

Tools needed to replace front brakes 2002 Ford Focus?

your rear bulb is blown - replace the bulb The turn signal blinks fast because the bulb is going out. That is also why the others dont blink.

On a 2002 Ford Explorer : Check the center console , in front of the armrest ( for the 12 volt auxiliary power point )

First you have to remove the front tire. Next you remove the splash guard toward the front of the wheel well. You can access the bulb from there. Try;

You can change the light bulb by this method.

To replace front brake pads on a 2002 Ford Mustang safely raise and stabilize the vehicle. Remove the wheels and caliper. Slide out the front brake pads and replace with new units.

how do i replace front wheel bearings on golf 1.6 2002 model

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.