answersLogoWhite

0


Best Answer

For a 2000 Chevy Venture first you need the lines. At the dealer they cost about $280. Replacing lines from Fuel tank up to under Rack & Pinion is a Picnic. But from this point there are 3 lines with quick connector that buried inside the frame through a black plastic triangle shape guide. They reappear at lover part of engine compartment but are bolted near engine cradle. If a pro can do it, is possible to be done by everybody, but many things can go wrong. Using rubber lines is dangerous because after some years rubber harden and leak, no mater how tight you clamps it. What I think to do: Buy from Dorman 3/8 x 12" Steel Bead fuel line, one 3/8 compression union, and 3/8 x 30" steel double flare line. I have to cut short about 3" long 3/8 Dorman 12" and create the double flare in one side. The bead fuel line side with a plastic connector and two 3/8 Vito O-rings goes to female quick connect of existing line. I have to cut of the pressure line inside engine compartment in a convenient area. Discard the bad part of the line through the plastic triangle. Run the new line through the hole, match lines at engine compartment, cut them off, and connect with a 3/8 compression union. To release the line from the bracket I might have to lower 4" one side of the engine cradle. I have replaced engine cradle in a Pontiac Transport, hoisting the engine from an overhead 3 T crane and jacking up the cradle, but a hate this. And about replacing all three lines forget about it. Only the pressure line if a could make it. P.S. why this double flare union. Because it is more handy to go through the hole at black plastic, and if something goes wrong it is more easy to replace.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How to replace fuel lines on Chevy Venture?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the fuel pump on a 1997 Chevy Venture van?

in the tank. have to drop tank to replace it!!


Where is the Fuel reset Chevy Venture van?

The Chevy venture does not have fuel reset. Some cars, like ford, kia, etc, has a fuel reset, but venture not.


Where is the fuel pump relay location on 98 Chevy venture?

How to trouble shoot fuel pump on 98 Chevy Venture


Where is the fuel filter located on a 97 Chevy Venture?

Should be either in front of fuel tank or along frame rail driver's side --follow fuel lines


How do you replace a fuel pump on a 1989 Chevy s-10?

You will need to drop the gas tank, unhook the fuel lines, and replace the old fuel pump with a new one and hook back up the fuel lines.


How do you change fuel pump on 2003 Chevy Venture?

The fuel pump is located in the fuel tank. So to replace it you will have to drain and drop the tank to do the job. Good Luck


Does the 1998 Chevy venture have a fuse to the fuel pump?

no- 1998-2000 Chevy Venture vans only have a relay for the fuel pump and no fuse.


How do you replace a fuel pump on a 2001 Chevy Tahoe 5.3 liters?

Drop the fuel tank down, disconnect the fuel lines


Where is the fuel pump on a 2005 Chevy venture?

Inside the fuel tank.


Where is the fuel pump located on a 1998 Chevy Venture?

In the fuel Tank.


How do you replace the fuel pump on a 1999 Chevy z71?

Drop the fuel tank. Take out fuel pump. Then replace. Be sure to detach your fuel lines (2) then detach the hose were you fuel up your truck at.


How do you replace the fuel filter on a Chevy Blazer?

Depending on the year, the blazers fuel filter is most likely on the frame. While covering the connection with a rag, loosen the fuel lines from the filter. Remove the filter and replace, then reconnect the lines.