Electric Windows
Windows and Mirrors
Ford Expedition XLT
Ford Explorer XLT
How To

How to replace passenger side mirror on 1996 Camry?

262728

Top Answer
User Avatar
Wiki User
2011-09-13 05:44:51
2011-09-13 05:44:51
Replacing power mirror CamryI have a 1993 Camry, but this should work for most 90's models. On the inside of the door, where the power mirror attaches, is a small plastic cover. Pry it off gently with someting that won't scratch like a plastic spatula. Under it there are 3 hex-headed bolts holding a metal plate and post assembly that anchors the plastic body of the mirror on your door. They're slotted for a Phillips but don't bother, it just strips right out, use a 5/16 socket to take them off. Hopefully you lowered the window so you can support the mirror assembly with one hand as you remove the last one. After the mirror assembly is detached it's easier to disconnect the electric connector. Replacement power mirror assemblies run about $35 right now on eBay, so save some money unless you absolutely can't live without it today. Reconnect the electrical, reattach the 3 main bolts making sure the rubber seal between the mirror and door fits back into place, then snap the plastic cover back in place.
1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

How much does it cost to replace a passenger side mirror on a 1996 Camary. The whole Mirror broke off. Answer I don't know how to fix one. I wish I did, I think I am going to have to buy one.

User Avatar

To replace the exterior mirror on a 1996 Beretta, find a small plate on the inside of your door. Remove the screws and install the new mirror.

User Avatar

i need to replace both side mirror on my SUV send my answer.

User Avatar

You first need to remove the triangle shaped trim piece inside the door opposite the mirror. It just pries out with a screwdriver. Then disconnect the electrical connections if a powered mirror. Undo the 3 bolts holding it and then remove the mirror. -RC-

User Avatar

You can replace a rearview mirror, on your 1996 Infiniti, by removing the old mirror with a scraper. Apply the glue to the cleaned surface. Hold the new mirror in place until the glue dries.

User Avatar

Go to this website. It will show to take off the door panel and the side mirror. http://www.kwmuth.com/techsupport/pdfs/21000170.pdf

User Avatar

look behind the door panel ther should be 3 nuts or more unscrew thoes if its power mirror the harnest is behind the door panel anyways

User Avatar

To replace the mirror on the drivers side of a 1996 Chrysler Cirrus acquire a direct replacement with the sail mount. This mirror is heated, non folding and is installed with a Philips head screwdriver.

User Avatar

To replace a light bulb in the map light on a 1996 Toyota Camry, the lens for the light has to be removed. There are clips at two opposite ends that have to be nudged gently with a flat screwdriver to get the lens cover off.

User Avatar

The cost of replace the brakes of a 1996 Toyota Camry ranges from $20-$60. This depends on the brand, the store and any labor or shipping costs.

User Avatar

passenger door lock cylinder. its a 5 digit and letter code.

User Avatar

Answering "http://wiki.answers.com/Q/How_do_I_replace_thw_radiator_in_1996_toyota_camry_model"

User Avatar

You have to remove the door panel, after that you will be able to replace the speaker.

User Avatar

How to remove left inner door panel of a Pontiac Bonneville 1996

User Avatar

You need to replace the EGR valve. Make sure to replace the plugs too after that.

User Avatar

there is no cabin air filter on a 1996 Camry

User Avatar

To replace most heater cores you have to remove the dash on the passenger side.

User Avatar

price of labor rate and parts will vary depending on location, where are you

User Avatar

remove the bolts holding the housing connected to the top radiator hose. go from there

User Avatar

Sedan or Van?... I know I recently changed the passenger side on our sedan, after the wife sucessfully removed it while backing out of the garage one day. There were bolts accesed from inside the vehicle, that allowed for easy removal/replacement. Fred

User Avatar

If it is a 4-cylinder engine, it is the cylinder furthest to the passenger side of the engine. If it is a V-6 engine, it is also on the passenger side, but on the head closest to the firewall.

User Avatar

where is the thermostat on a 1996 Toyota Camry

User Avatar

The ECT or the Engine Coolant Temperature Sensor is a switch. This switch is located on the bottom of the radiator in the 1996 Camry.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.