Mercury Grand Marquis
Crankshaft Sensors
DIY Projects
How To

How to replace the crankshaft on a 92 grand marquis?

252627

Top Answer
User Avatar
Wiki User
2006-02-04 07:00:46
2006-02-04 07:00:46

Remove the engine. Take the oil pan off and take every bolt out that you see. It will fall right out.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

A 1992 Mercury Grand Marquis came from the factory with ( 5W-30 )

User Avatar

do you have to remove fuel tank to replace fuel pump

User Avatar

I've had a similar problem with my 92 grand marquis. I had to change the mass air flow sensor and replace a broken vacuum line. after that my car ran better than it ever did.

User Avatar

The EDIS-8 on a 92 Grand-Marquis is on the firewall just in front of the driver, under the hood's edge. A bad place for an expensive piece of electrinics as the thin circuits get rained on and damaged by rust. Andre Plamondon, martialartsword@live.ca

User Avatar

There should be a sticker on the underside of the trunk lid - that's where it was on my 92 grand marquis

User Avatar

the door code number is on a sticker inside trunk lid

User Avatar

take theone out and put in the new one. old

User Avatar

the 92 4afe toyota engine does not have a crankshaft position sensor

User Avatar

92 was originally R12. But it can easily be converted to 134A.

User Avatar

On the oil pan, bottom of the engine. Crawl under the car and look, you will find it.

User Avatar

Mercury changed the style of the Grand Marquis in 1995. 92-94 are compatible, 95-97 are compatible. You might be able to force it and figure out a way to get it to work, but it probably wont look good. My family have a 1993 and 1997 Marquis, and the front ends are different.

User Avatar

I don't know about a 92, but my 90 GM GS has no tensioner. Instead the alternator functions as the tensioner. Loosen the top bolt and slide it to the left.

User Avatar

The 1992 Mercury Grand Marquis dashboard is held in place with six retaining bolts and 14 retaining clips. Remove the retaining bolts and pry outward on each retaining clip. The dashboard will come off in two pieces.

User Avatar

I had the same problem with my 92 Grand Marquis. Seems that the windshield wiper motor was running in the opposite direction for one reason or another. You may need to replace the motor or have someone look at it. Fortunately for me, my mechanic drilled a hold on the motor and flipped around, now my windshield wipers stay down when not being used, however they stay up when in use... weird.

User Avatar

Hi; the sticker on the inside rear door of my `92 Grand Marquis GS states as follows: standard package- 215-70R15 handling package- 225-70R15 hope this helps!!

User Avatar

A 50/50 mix. You can get it at most Auto Parts Stores already pre-mixed. The type doesn't matter...

User Avatar

YES BUT. YOU SHOULD USE THE 1996 CRANKSHAFT AND THE 1996 INTAKE SO YOU NEED TO DISASEMBLE BOTH ENGINE TO DO ONE

User Avatar

I just had to replace one in my daughters car, rebuilt they wanted $140.00 at the junk yard it was $80.00 i was lucky and got on out of a bone yard a friend of a friend works at for free, just hope it lasts longer than a few weeks lol.

User Avatar

Check the horn - if it doesn't blow, then you may have found the culprit. In most cars, the lighter and horn are on the same circuit.

User Avatar

Check fuses first then wiring. also check to see if anything (like a coin) is in it causing it not to have power. If it has power its probably just the element.

User Avatar

how to replace the turning flasher on a 92 camry

User Avatar

how do u find and replace a 92 acura legend thermostat

User Avatar

It is a little tricky. I would suggest buying a haynes or a chilton manual. You can find them at autozone.

User Avatar

not running on all cylinders? check for spark and compression on all cylinders perhaps catalytic converter is plugged


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.