remove pad from door, on the back remove the cover inside you will see slots with blue and red tags. The blue ones are set to allow the lock to slide freely and the red are your code, simply pull out a red one and swap with a blue one make sure the large cut away on the tag faces the outside edge. Some locks require you to hold the c key in while changing.
You take it to the dealership
Two ways. Computer dealer reset or u need the original code to enter the new one
Superman
have a 1993 mercury villager. Don't have door key code can't find default code in glove box. Does anyone know what the default code is
You take it to the car dealer and they will tell you how.
turn your ignition switch off and then on in rapid sucession four times dash lights will blink and code can be reset
Each vehicle has it's own factory keyless entry code
Each vehicle with keyless entry has it's own factory code
Use a pen or similar object to press and hold the reset button on inside of the door for 30 seconds.
how do you get the entry codes for expedition eddie bower
The code is still available on the receiver/opener. You can find it there and re-program your clicker.
dont need the current code...under drivers side dash. you will have to basically lay down in the floor. you will see a sticker with the factory code. you will have to use that to reset the door code. those instructions will be in your owners manual.