There is a clip holding the handle. It is located in the center in the back of the handle. There is a tool to remove & install it; but you can use a flat screwdriver carefully. Good luck.
They pop off. You use a screwdriver or some type of panel removing tool.
There is a tool that you can use to knock-off the retainer clip. Any auto store should have it.
there is a C shaped clip behind the handle. I have the tool to remove it you can get them at auto zone. you can also use a small pick to pull clip out but watch out it will fling out
There is a C-Clip behind the handle. You must use a special tool to drive if off first. Once you have the C-Clip off, you can pull the handle straight off. Most auto body shops have the tool. You can use other tools, but it must be U-shaped and and you must get it in the right position and tap it off. It is not easy, but is the only way without destroying the handle.
Push the door panel in around the window handle and use a screwdriver or a piece of wire with a hook to pull the clip off....it's in behind the handle.
Call an auto parts store, tell them what make/model/year car you have and ahk if they have a window-crank removal tool they can sell you. If so, ask the guy who sells it to you how to use it. Best I can do for you, best of luck.
there is a clip on the handle you have have the knob faceing upward and use a flashlight and a butter knife to remove. The clip is u shaped.
You really need a special tool to remove the "C" clip that's behind the handle. Your local auto parts store will have the tool and it should be under $10. People use a couple screw drivers but you may do some damage in the process.
they make special manual window crank removal tool but you can use a screwdriver its kind of tricky though.you local parts store will have one and they will show you how to use it if you buy the tool its a breeze.and you wont damage the door panel.
It requires a special tool available at the parts store cheap. Use 2 Screwdrivers, force a rag between the door and the window crank handle to give you some space, then pry the clip apart or take a small hook, hook under the loop of the pin and pull up.
There should be a horseshoe clip behind the hand that needs to come off and then it will just pull off. If you use a hook tool you can get it off or a clip removal tool. Push in on the panel slightly and you should be able to see it.