Want this question answered?
It is a type of plug/receptacle. Once you insert the plug, you can twist the plug to lock it in the receptacle.
With a chain and lock of course like we do on fire suppression systems to prevent tampering
You can open a key lock on a door knob, or you can open a deadbolt lock on the door itself.
Lock Range of a PLL is the range of frequencies centered at free running frequency of VCO, around which the PLL can remain in locked state. Capture Range of a PLL is the range of frequencies centered at free running frequency of VCO, around which the PLL can acquire lock-in from an unlocked state. The relation is Capture Range<=Lock Range
Locks are used for locking up a special item or at least very valuable item. For example a person who goes to school may use a backpack lock to protect their important things like textbooks, notebooks e.t.c Types of locks are: Combination Lock, Passage Lock, Backpack Lock etc
The function of Lock ring or lock nut in the purifier is basically to the parts in the purifier together.As the lock ring is tightened the bowl is compressed ,in turn compressing the disc stack.The disc stack pressure is very important and the lock ring should never be overtightened. The lock ring usually has a left hand thread if the purifier turns clockwise as vice versa to prevent it from slackening during operation.
lock them in tight.
Blue loctite will release with a little heat.
yes, but not the best way.loose braids will lock faster then tight cause they can unravel move and knot up.
NO!!!!!!!!!!!!!! DO NOT DO THIS!!!!!!!!!!!! Take it to a gunsmith for proper repair.
lock tight you can get it at any auto store or hardware store
Possibly too tight a clearance. if that's the case, shims are avail.
You must not know anything eh? There is no best actually, but usually a chain and a master lock does quite well given you lock it up tight enough, if you can't get a chain and a lock or dont want that, then get a horse shoe/U shape lock, or any bicycle lock for that matter. Rule of thumb, if someone really wants it, they'll get it.
Get the size of alen key needed and untighten the grips then put them on the handle bars and then make them as tight as you can
The best way to perserve a snake skin is an air tight bag like a zip lock
ighten the lock nut at the center of the hub.
dowls or keyways must corispond with left inlet right exhurst and you need cam shaft locking tool to lock cams