answersLogoWhite

0

How you find ups watts?

Updated: 11/22/2022
User Avatar

Wiki User

11y ago

Best Answer

It is expressed in Volt-Amperes not Watts.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How you find ups watts?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering
Related questions

How you find ups watts and give detail about VA?

UPS power is not specified in watts.However VA is the equivalent of watts, assuming no phaseshift in the load.


How many watts do a 850 VA ups use?

maximum power out put is 500 watts


Two measurements are used to rate the capacity of a UPS?

ohms and watts


What two measurements are use to rate the capacity of ups?

VA and Watts


What size of a ups would you need to handle 20 watts?

UPS batteries are typically rated at how many ampere hrs they can supply. IF your 20 Watt device is supplied by 120V then it draws 1/6 amps. (Watts = Amps * Volts for a resistive load). If your UPS were rated for 1 A Hr you could power your device for 6 hours.


How may watt does a load of 3570 watt draw from an UPS of 2010 watt?

If the load wattage is 3570 watts then that is what the load wattage draws. Now by using the expression "draws" maybe you meant to say amps. If it is amperage that you are looking for then the answer can not be given without knowing what the voltage of the system the UPS is tied into.The equation to use is A = Watts/Volts.If a UPS nameplate output rating is 2010 watts then that is the maximum that the UPS is designed for by the manufacturer. Applying a greater load that what the UPS is rated for will void the warranty. Match the load wattage to the UPS's output when calculating what size is needed to operate correctly. This can be done by adding up all of the device wattages that will be connected to it. If the device does not have a wattage shown use the equation above to find the wattage.


What battery back up is recommened to use in sump pump?

My neighbor is running two UPS (Uninterrupted power supplies) computer back-up power supplies. One is 865watts, one is 600 watts. She plugs the sump into a UPS and plugs that UPS into the other UPS. She said one 865 watts isn't enough. They burn-out too fast. The other 600 watts allows it to run 2-3 days (as needed) during a power outage. I don't know how big her sump is. Could make a big difference if its 1/2 or 1/3 hp. I bought 1200 watts in one UPS. It arrives this week. I hope its enough power. I run a 6500 watt Briggs/Stratton generator to power the house and recharge the UPS when the sun rises. 'Cause otherwise, its too loud and wakes the neighbors!


What kva generator to run 15Hp motor?

1HP = 746 watts 15 HP = 11190 watts = 11.19 kW You would need a generator of at least 13kW. UPS Distributor for 15 Years.


Where can you find 55watts on a Chevy prizm?

Watts or Amps? Amps would be the alternator, don't know where you would find watts. Volts X Amps = Watts, for example 12 Volts X 55 Amp Alternator = 660 Watts


How do you determine Uninterrupted Power Supply size?

The load size in watts is what determines the size of UPS needed. Add up all of the load wattages that you would like to have an uninterrupted power supply. Some UPS units are rated in VA output, for the purposes of this calculation VA is the same as watts. There are many UPS calculators on line if you need any help deciding what to connect to it. Remember the larger the UPS the more the cost is going to be. Read the discuss page for calculator.


Where can one find information on UPS numbers?

To find phone numbers for specific UPS departments, one should check out the official UPS website. UPS's main phone number is 1-800-PICK-UPS. They can also be contacted through email on their website.


How many watts in 26kw?

To find watts in kilowatts multiply kilowatts by 1000. In this case, 26 x 1000 = 26, 000 watts.