answersLogoWhite

0


Best Answer

IMPORTANT: Do not skip the fuel system pressure release step. Injury and other damage can result! Safety Step! Relieving Fuel System Pressure · allow engine to cool · relieve fuel system pressure · put on your eye protection Before you begin the job of replacing your fuel filter, you must relieve the pressure in your fuel system. A fuel injection system operates under very high pressure. If you don't release this pressure before you start unscrewing fuel lines the result can be explosive. Do this before you attempt to change the fuel filter. To release the pressure in your fuel lines (and fuel filter) you'll need to locate the fuel pump fuse in the fuse box. If you don't have a fuel pump fuse, find the relay that operates the fuel pump. Once you've found the fuel pump fuse or relay, start the car. With the engine running, pull the fuse or relay out. If you pulled the right one, the engine will quickly die. Since it's using all of the pressurized fuel in the system, the fuel lines won't be pressurized when you crack the fittings on your fuel filter. Now that you've relieved the fuel pressure you can remove the old fuel filter. If you didn't do this yet, you must go to the previous step and do it. Very dangerous!

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How you relieve fuel pressure on 2005 ford ranger?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you relieve the pressure in the fuel line on a 96 Ford Ranger before changing the fuel filter?

on my 1994 ford ranger, i just removed the holding rings on each end of the in and out line very slowly until the pressure was released. you will get a bit of gas spray but nothing serious. hope this helps. fordman.


How many gallons of gas does a 2005 Ford Ranger hold?

The 2005 Ford Ranger ( SuperCab ) holds ( 19.5 U.S. gallons )


Towing compasatity of Ford Ranger xlt 2005?

i need to know the towing weight of a ford ranger xtl 2005 double cab


Where oil sending unit on 1992 Ford Ranger?

Where is the oil pressure sending unit on 1992 ford ranger


Where is the low pressure ac recharge port on 1993 Ford Ranger?

where is the low pressure port for the a/c -- 93 ford ranger 4.0L -- super-cab


How many gallons does a 2005 Ford Ranger hold?

According to the 2005 Ford Ranger Owner Guide the SuperCab version holds ( 19.5 gallons ) U.S.


Where is the drive shaft?

where is the driveshaft on a 2005 Ford Ranger


What causes front tire wear on the inside edges on a 2005 Ford Ranger?

Improper tire pressure or a bad toe out. Take it to an alignment shop.


Does the 2008 Ford Ranger have a sensor for low tire pressure?

Yes , I was looking at the 2008 Ford Ranger Owner Guide and it shows there is a low tire pressure warning light


What is the fuel pressure specs for a 2000 Ranger 4.0 VIN X?

56 to 72 psi - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups, all models.


What is the fuel capacity for 2005 Ford Ranger?

According to the 2005 Ford Ranger Owner Guide : ( the SuperCab body style holds 19.5 U.S. gallons / 73.8 liters )


Where is the low pressure ac valve on a 1999 Ford Ranger?

The 1999 Ford Ranger low pressure air conditioning valve can be found on the air conditioning compressor. The low pressure valve will be labeled as the low pressure port.