Most modern Japanese cars require the font bumper and possibly grill to be removed before removing the headlights. Once the front bumper is off you can usually see the mounting bolts for the headlight fairly easily.
replace headlight on mazda sp20
How do you replace headlight bulb on 2004 Mazda Tribute?
Push the spring towards the headlight and slide it downward gently. You should be able to remove the bulb.
you have to remove the whole mud flap above the tire.
how remove headligth lenses for 2004 Mazda mpv
from inside, in footwell undo plate, headlight behind
beat the car with a bat
Open the hood and look at the headlight assembly. There are three 10mm bolts holding it it. Remove these and unplug its wiring harness. Now you can remove the assembly from the car . On the back you will see three circular covers for the lamps. Unscrew these & replace lamps & reassemble! Hope this helps!
I did it few months back, under the Hood, when you check your headlight there is a metal ring like lock just unlock by pulling it easily, remove the rubber cover and pull out head light bulb.. done. Replace the bulb, and replace the same way.
For the 1994 model (B3000), you can't change just the bulb. You have to change the headlight assembly.
could someone please tell me how to remove the front headlight unit from a Mazda 6.? the light housing where the bulb goes is loose causing my light alighnment to be off and i cannot get my hand in from behind to try to fix it.
To remove the headlight on the mx-3 you must unbolt the front bumper, loosen all 4? bolts and disconnect the headlight wiring. The whole unit should just pull right off.