Should be located at the upper end of the brake pedal under dash area Check to see that one side has power at all times and the other side only gets power when switch is closed
check wiring, check bulbs, check fuse, check brake light switch,
Check fuse, check bulbs, check brake light switch, check wiring and then check signal switch, in that order.
Check the ground wire to the brake lights.
check brake light fuse and brake light switch on pedal
Check the brake light fuse, the bulbs, the brake light switch and last, check the signal switch.
Check
Check you brake fluid and the brake switch on the proportioning value. If the fluid level is ok then disconnect the switch to see if the light goes out. Also check the parking brake switch.
First check the brake light fuse, then the brake light bulbs and lastly check the brake light switch. If all that checks good you may have a faulty signal switch (AKA the multifunction switch).
Check the fuse, check the bulbs, then check the brake light switch.
Check the fuse, check the bulbs and check the brake light switch.
you do not adjust the brake lights check the bulbs or check switch top of brake pedal.
check the brake light switch